Shanghai PYZ1750 spring cone crusher

最大进料料度(mm)：

185

破碎产量(t/h)：

115-320

电机功率(KW)：

160

Working Principle
The spring cone crusher is mainly composed of a frame, transmission, hollow eccentric shaft, bowl bearing, crushing cone, adjustment device, adjustment sleeve, spring and hydraulic station for adjusting the ore discharge port. When the crusher is working, the motor drives the eccentric sleeve to rotate through the horizontal shaft and a pair of bevel gears. The axis line of the crushing cone makes a swing motion under the force of the eccentric sleeve, causing the surface of the crushing wall to sometimes approach and sometimes leave the rolling mortar wall. surface, so that the ore is continuously squeezed and bent in the crushing cavity to be crushed.
Product advantages
Structure introduction: The structure of the cone crusher mainly consists of a frame, a horizontal shaft, a moving cone, a balance wheel, an eccentric sleeve, an upper crushing wall (fixed cone), and a lower crushing wall (moving cone). Cone), hydraulic coupling, lubrication system, hydraulic system, control system and other parts
The moving cone and the fixed cone are both upright. When the moving cone swings, near the discharge port of the crushing chamber, the moving cone and the There is a parallel belt with equal gaps between the fixed cones, so that the finished product has a uniform material size. The size of the material opening is not large, and all materials that can be processed are the materials that have been crushed for the first time
This series of cone crushers use dry oil or water. The sealing method prevents dust and impurities from entering the machine body, thus ensuring the cleanliness of the lubricating oil, extending the service life of the sliding bearings and thrust ball bearings, making the machine reliable in operation
, the moving cone rotates continuously, and the material is broken during the process The discharging and discharging processes are carried out alternately and continuously along the working surface, with high productivity
, the product material is relatively uniform and has a cubic shape, the wear of the working surface of the moving cone is also relatively uniform
, and the material is sandwiched between the two cones , subject to extrusion, bending and shearing, it is easier to break and consumes less power