Shanghai SC1380 compound cone crusher

最大进料 （mm）：

215

最小出料口尺寸 （mm）：

19

电机功率 （kw）：

185-220

Working Principle
During the working process of the cone crusher, the motor drives the eccentric sleeve to rotate through the transmission device. The movable cone rotates and swings under the force of the eccentric sleeve. The section of the movable cone close to the static cone becomes the crushing cavity. , the material is squeezed and impacted multiple times by the moving cone and the static cone and when the crushing cone leaves this section, the material that has been broken to the required particle size falls under its own gravity, and the broken material is discharged from the bottom of the cone from the cone crusher The feed port of the machine is loaded into the machine
Technical advantages
Hydraulic protection and hydraulic cavity clearing, high degree of automation, reduced downtime, hydraulic adjustment of the discharge port and overload protection greatly improve the operation level of the crusher , making maintenance simpler, operation more convenient, and downtime shorter. The two-way over-iron release hydraulic cylinder of the cone crusher can allow iron blocks to pass through the crushing cavity. The machine can hydraulically jack up in the event of over-iron and instantaneous crushing. Automatic discharge greatly reduces the trouble of the original spring cone crusher needing to shut down for manual discharge. Thin oil lubrication, reliable and advanced, improves service life. The unique thin oil lubrication system design greatly improves the service life of the equipment. Performance The non-contact labyrinth seal has no wear, improves the reliability of blocking dust, and fundamentally eliminates common faults such as oil and water mixing in the original spring cone crusher
, multiple crushing chamber types, flexible application, and strong adaptability , the cone crusher only needs to replace the fixed cone lining plate and the moving cone lining plate. The crushing cavity shape can be changed from the standard ultra-coarse cavity type to the short-head ultra-fine cavity type to adapt to a wide range of product particle size requirements
. It provides Higher production capacity, optimal product particle shape, easy automatic control, maximum reliability and flexibility, truly creating more value for users
, easy maintenance, easy operation and use, all parts of the cone crusher Both can be disassembled, assembled and maintained from the top or side. The movable cone and fixed cone are easy to disassemble and assemble without disassembling the frame or fastening bolts. Therefore, it is more convenient to replace the liner of the cone crusher on a daily basis. The hydraulic motor is used to maximize the production efficiency of the crusher. Excellent
, laminated crushing, excellent finished product particle shape, through a special crushing chamber designed using the inter-granular lamination principle and a matching rotation speed, replacing the traditional single particle crushing principle to achieve selective crushing of materials , significantly increased the fine material ratio and cube content of the product, and greatly reduced the needle and flake materials
, large crushing ratio, high production efficiency, combining higher speed with stroke, making the rated power of the crusher The hydraulic cone crusher is designed with a perfect combination of crushing stroke, crushing speed and crushing cavity shape. It consumes less wearing parts, has low operating costs, has a reasonable structure and has a high crushing efficiency. Advanced principles and technical parameters, reliable operation, and low operating costs. All parts of the crusher have wear-resistant protection, which reduces maintenance costs to a minimum, and the general service life can be extended above