Widened double-layer tile press 840 Widened double-layer tile press Double-layer tile press widened

Double-layer laminated tiles
1. Technical parameters
,
Length, width and height
, steel used for large frame
, forming shaft diameter, quenching and tempering
, The material of the forming wheel is forged and plated with hard chrome
, transmission sprocket, chain
, motor
, number of forming rows/ /
, fully automatic computerized fixed-length cutting system
> , four-stage pump station motor
, shearing mold
, molding speed/
, pressing thickness
, pressing width
2.
Tile pressing machine How to use the electric control box: Press the oil pump start button. Pay attention to the direction of the oil pump motor.
Press and hold the tile machine to move forward, move the board to the outside of the knife edge, hold down the scissors to cut the board, and press scissors up to raise the knife to the upper limit.
When the working screen is displayed, press the button to clear the current number of sheets and press the button to clear the current length. When the working screen is displayed, press the button to select the length or number of sheets. (Press the key once, and the number of sheets will be framed by a black frame. Press it again, and the length value will be framed. Each time you press the button, the number of sheets and length will be framed once. The value can only be changed when the frame turns black.) . Button reset. Press the numeric keys to enter. (From the high position to the units position. Input the example, enter the meter,)
, and press the button to confirm. (You must press the key after changing the value, otherwise it will be invalid) Press once to start automatically after all settings are completed, and the machine will start working according to the set data. Automatically stops after work is completed. If you still need to continue working with the same length, just press the button (clear button for the number of cut sheets), press it to start automatically, and the machine will work again according to the number set on the display. If you need to change the length, you can directly set the next production task. And pay attention to clearing the number of cut sheets before starting automatic next time (press the key on the display).
When stopping in the middle, just press once to stop automatically. When continuing to work, press again to start automatically. Just press the oil pump to start.
If the length of the board does not meet the requirements, press the & key or key to the adjustment screen, and readjust the compensation amount plus or compensation amount minus based on the original compensation amount. (Correction of the length of the front plate + compensation amount plus compensation amount minus The length of the board after correction)
The deceleration distance of the tile press is for frequency conversion machines, generally in millimeters. This value is meaningless for ordinary machines