CNC shearing machine fully automatic CNC shearing machine fully automatic CNC shearing machine

Fully automatic CNC shearing machine
1. Technical parameters
Equipment weight
Main motor power
Hydraulic motor power
Cutting knife material bow knife
2.
Safe operating procedures for tile press
Electricians must be familiar with the electrical circuits in the workshop and the types and performance of electrical equipment. Risky operations are prohibited without a full understanding of the performance of electrical equipment. Electricians should regularly check cables and Regarding the condition of motors, electric consoles and other equipment, problems found during inspections must be dealt with in a timely manner. When checking the motor temperature, first check that there is no power, and then test with the back of your hand.
Except for temporary construction electricity or temporary measures, no temporary wires are allowed, lights, instrument tools, welding machines and other safe switches and sockets are not allowed to be hung randomly. The original electrical lines are not allowed to be changed without authorization.
. Conduct regular inspection and maintenance of electrical equipment in accordance with regulations, and completely remove unused electrical equipment lines.
For partial power outage operations, when the distance between nearby electrical equipment and maintenance personnel is less than 3.0 meters, dry wood, rubber or insulating materials must be used as reliable temporary barriers.
When using power tools, there is protection against electric shock.
When using a ladder, the angle between the ladder and the surface should be several degrees. When using a ladder on a cement surface, anti-slip measures must be taken and someone must hold the ladder.
When it is found that any conductive part of the equipment is grounded, before cutting off the power supply, except for rescuing the person who got an electric shock, no one is allowed to get close to it, and stay away from the surrounding area for meters and . meters indoors to avoid step voltage damage.
When repairing equipment, pull down the switch and the blade. Warning signs prohibiting contracts and people working must be hung on the switches and blades. Warning signs should be hung on the fences of live equipment and in aisles where access is prohibited. There is a warning sign indicating the danger of high voltage. Warning signs indicating where you should work should be hung at the workplace.