Slitting machine Slitting machine manufacturer Slitting machine wholesale

Slitting
1. Various parameters of the slitting machine
, the slitting ability is infinitely extending the shaft diameter
, the slitting width and the board width can be adjusted arbitrarily
, and the external dimensions< br/>, planetary cycloid reducer, motor power
, working efficiency per minute
, plate thickness
, power supply requirements
, motor power
2.< br/>Precautions for the operation of the tile press
The mold used by the tile press equipment requires an upper mold and six lower molds of the same specifications and sizes. The upper mold and a lower mold are installed first, and the lower mold is directly installed on the hexagonal On the runner workbench, the upper mold is installed on the bottom of the sliding seat, and a backing plate of appropriate thickness is placed to ensure that after the upper and lower molds are closed, the surrounding gaps are even and the distance between the upper and lower molds is equal to the thickness of the required tile blank. Then take the upper mold as the standard, turn the workbench, and install the remaining five sets of lower molds. Only after the upper and lower molds are installed can the car be driven for tile pressing. Before using the equipment, check whether the connections are firm and whether the mounting bolts and nuts are tightened. Enough lubricating oil should be added to the left and right chassis before the machine can be powered on and started for test run. The machine should be empty first. Observe the operation carefully to see if there is any vibration or noise, whether there is oil coming from the oil window, and whether the movement of each component is coordinated. The mold can be installed only after everything is normal. When installing the mold, the power must be cut off, and the motor belt or large gear must be moved manually to make the workbench Index the position and raise the sliding seat to the highest point. It is best to use an object to support it between the workbench and the bottom of the sliding seat to prevent the sliding seat from falling naturally and causing an accident. Features of the tile press equipment: This equipment has the advantages of operation, maintenance, maintenance, mechanical debugging, and easy mold replacement. The entire unit automation control system adopts a highly integrated network, making the automation system performance more superior. The equipment uses high-level automatic control software to achieve Production information management In the process of straightening the color plates produced by the tile press equipment, the profile will move from top to bottom, left and right, which requires a relatively loose gap between the straightening mechanism and the profile. There can be a certain gap between the upper, lower, left and right surfaces of the profile. The gap size is between (.). If it is straightened and twisted, the gap can be smaller.