820 glazed tile pressing machine 820 glazed tile forming machine 820 glazed tile machine

Glazed tile press machine glazedbr/> 1. Type glazed tile press
, equipment overall dimensions
, equipment weight about
.tons
, number of equipment roller rows
Discharge
, equipment main motor power
, hydraulic pump station power
hydraulic station pressure
, raw material width
raw material thickness
, roller material
The steel surface is plated with hard chromium, hardness
, roller diameter Ф
, working speed
/
, forming method, loading roller forming antique shear joint plate
2. How Maintenance of color steel tile press equipment
)Hydraulic oil circuit
). If the color steel equipment undergoes hydraulic system maintenance, the oil level in the oil tank should also be checked weekly. If the oil level is lower than the oil window, hydraulic oil should be added
). It should not exceed ℃. The system oil temperature should be between ℃ ~ ℃. If it is too high, it will cause the deterioration and damage of the oil and accessories.
). The hydraulic oil used in this machine is or
) hydraulic components
). Cleaners cannot be used. Clean hydraulic components (base plates, valves, motors, pumps, oil pipes, etc.) every month to prevent them from getting dirty. things enter the system.
). Check whether there is deformation in the bends of each oil pipe of the tile press after one month of use of the new machine. If there is any abnormality, it should be replaced. After two months of use, the connections of all accessories should be tightened. When doing this work, the machine should be turned off and the system should be free of pressure.
)Filter
). The filter should be replaced or thoroughly cleaned every time the oil is changed.
). Check and clean the air filter on the fuel tank every month. It is best to replace it every year.
). It should be replaced. The machine tool has relevant alarms or other filter abnormalities such as dirty oil quality
)