Flying saw punching machineFlying saw punching equipment

Profiled steel flying saw cutting machine
1. Technical parameters of profiled steel flying saw cutting machine
, volume length.m, width meter, height.m
, weight is about tons
, Main motor power
, hydraulic pump station power
, electrical appliances imported Delta point inverter, Rip line, encoder. Chint, Delixi and foreign control parts
, saw blades are made of high-speed steel pipe cutting saw blades
, punching mold round steel and plate quenching fine grinding line cutting
2.
Installation method and selection of tile press
The overall hoisting method refers to the construction method in which the grid is assembled on the ground and then hoisted into place using lifting equipment. The welding and splicing of the entire grid are all carried out on the ground, easily ensuring the quality of the construction. Because the entire grid is placed in place by lifting equipment, the capacity of the lifting equipment and the control of lifting movements are particularly important. The overall hoisting method is suitable for various types of grids if the site and lifting equipment allow it. The focus of the construction is the control of the synchronous rise of the grid and the control of the displacement of the grid in the air.
High-altitude sliding method for tile press installation
High-altitude sliding method refers to sliding the segmented tile press units individually (or one by one) on pre-set slide rails to the designed position and splicing them into Overall installation method. Because the grid in the high-altitude sliding method is a rowing operation, it has no impact on the internal construction of the building. The installation of the grid and other construction in the lower part can be carried out in parallel and three-dimensional operations, speeding up the construction progress and shortening the construction period, without the need for large equipment and traction equipment. It is especially suitable for spanning projects using the above-mentioned grid and situations where three-dimensional intersection construction is required. The key point of construction is the control of synchronous slip of the sliding unit
Selection of tile press
The rigidity of bearings, bearing seats and bases determines the performance of the tile press
, The mechanical transmission system’s impact on rotation Parts are crucial, and users should choose the appropriate balance level of the tile press.
The flexible base or bracket is sensitive to the unbalanced state of the tile press.
When choosing a tile press, you must choose a solid shaft. The greater the pressure of the solid shaft, the better the accuracy of the products produced