Waterproof gutter forming machine Waterproof gutter machine manufacturer Price of waterstop machine

Waterproof steel plate designbr/> Formed shaft rows, formed shafts, leveling shafts, leveling rollers, four rows of straightening side wheels, extruded side wheels, all of which are round steel quenched and tempered solid shafts
Middle plate
Thick
Large steel frame
Wheel bearing steel, quenched, tempered and hard chromium plated, arranged with shaped wheels, two rows of squeezed side wheels, row of straightened side wheels
Single machine weight tons
Single machine installation dimensions
The electronic control system of the whole machine adopts Taiwan Delta electronic control, which makes counting more accurate
Main machine power
Cycloidal reduction motor hydraulic shearing power
Production speed About/
Hydraulic station pressure
The small edges of various specifications in purlin rolling specifications are angled
Plate thickness
Adjustment is unilateral, and there is a manual adjustment on the left side of the machine wall panel The lock nut can be loosened by loosening the wheel and spacer on the lock nut shaft. There are movable spacers on both sides of the wheel. For example, for modulation, you only need to take a spacer from both sides of the wheel and place it in the middle of the wheel. It will keep the center line. No change, flying saw punching needs to make a center hole, so that our machine flying saw can be fixed without wasting material, and the machine adjustment is the most convenient among the peers.
The waterstop equipment is a forming unit that uses rollers to produce finished waterstops. The water stop equipment mainly consists of a passive loading rack, a leveling device, a post-forming cutting device, a hydraulic station, a computer control system, etc. It is easy to operate.
Waterstop steel plates, like rubber waterstops, can be used for waterproofing underground structures, dams, reservoirs, swimming pools, roofs and other building materials, expansion joints, and deformation joints of buildings. This product is mainly used in foundation projects, underground facilities, tunnel culverts, water aqueducts, retaining dams, etc. that are installed in construction joints and deformation joints when concrete is cast in place and integrated with the concrete structure to ensure the service life of the project construction.
The thickness of the steel plate waterstop is generally thick. Generally, steel plate waterstops use cold-rolled plates as the base material, because the thickness of the cold plate can be uniform, while the thickness of the hot plate is generally not uniform. The thickness is generally millimeters or millimeters, and the length is generally processed into meters or meters. Generally Good transportation for three meters. Waterproof steel plates have higher requirements on welded joints, and leakage points cannot occur, which will affect the waterproof performance.