Silicone padding on the reverse side of leather

规格：

塑胶管300ml/支

颜色：

白色/透明

包装：

30/60支箱

Leather back-filled silicone

Product introduction
Xinhou brand leather back-filled silicone is a one-component silicone rubber that can be surface vulcanized within minutes at room temperature and naturally dried. Leather back-filled silicone It is a completely transparent liquid silicone that can be quickly leveled inside the concave and convex chisels. It has good fluidity and is easy to operate.

Product Usage
The back side of Xinhou brand natural dry leather is filled with silicone and is suitable for leather shoes, leather bags, leather clothing and other genuine leather, fake leather, leather and other materials. The finished products have obvious concave and convex surfaces, are soft to the touch, are resistant to high and low temperatures, and do not deform or rebound when washed, etc. This substantially improves the quality of your products and invisibly increases the market competitiveness of the products!

Operation method
Use a high frequency mold to press the leather into concave and convex patterns.
, fill the reverse side of the single-component leather with silicone and directly inject the pressed concave and convex patterns.
, it can be tack-dry in minutes at room temperature and fully cured in an hour.


Notes

Single-component leather filled with silicone on the back needs to be isolated from the air, completely sealed and stored in a cool place to prevent exposure to rain and sunlight.




Specialized natural dry silicone for the back of the leather, used for filling the back of the leather. First, the back of the leather is molded into a convex and concave pattern with copper. Silicone coats the convex and concave sides of the leather, allowing it to level naturally. Leave it statically for a few minutes until it dries. Leave it aside for an hour to fully solidify and you can use it!