- 扬程:
- 30-50
- 功率:
- 5.5-22kw
- 电压:
- 380-1140v
--Submersible sewage pump
The non-clogging sewage pump (hereinafter referred to as the electric pump) consists of three parts: a water pump, a seal and an electric motor. The motor is located on the upper part of the electric pump and is a three-phase asynchronous motor. A double-end mechanical seal is used between the water pump and the motor, and a "shaped oil-resistant rubber sealing ring is used as a static seal at each fixed stop seal. This series of electric pumps introduces and absorbs advanced foreign technology. It adopts an open single-blade impeller with a novel and unique structure. In particular, it has excellent blocking performance. It can cut and tear long fibers, plastic paper tapes, toilet paper towels, etc., and can protect the The flow path of the tending water pump is unobstructed, making it an ideal sewage pump for Hezhong.
Uses of submersible sewage pumps:
This series of electric pumps are widely used for the discharge of sewage and pollutants in municipal sewage treatment, construction projects, hotels, mines, ponds, printing and dyeing, papermaking, textiles and other places. It is an ideal equipment for pumping mud, mortar, domestic wastewater, sewage and urine, and fixed particles containing fiber, paper scraps, sediment, etc.
Series submersible sewage pump model parameters
rModel
rFlow rate
rHeight
rVoltage
rPower
rspeed
rcaliber
r
< br/>
rinch
--.
/
< br/>
/
--.
/
/
--.
/
/
/
/.
--.
-
< br/>
-
-
< br/>
-
--.
--.
--.
< br/>
--.
Other models in this category: --, --, -- submersible sewage pump, --, --, --, -- sewage submersible pump, --, --., --. non-clogging sewage pump, --., --, --, -- non-clogging submersible pump.
Conditions for use of plug sewage pumps:
The electric pump should be able to work continuously and normally under the following conditions of use:
The volume ratio of solid impurities or fibers and other similar media in the working medium does not exceed %, The particle diameter is no larger than .
, the medium temperature does not exceed ℃. Medium has values between -.
The electric pump should be used within a value range near the rated lift.
The electric pump should be completely immersed in the water and the submersible depth. The water should be deeper than the depth, but not deeper than the depth, but it must not fall into the mud.
, the power frequency is , the single-phase voltage is , the three-phase voltage is , and the voltage fluctuation range is - times of the rated value.
Product features:
. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through fiber substances twice the diameter of the pump and solid particles with a diameter of about % of the diameter of the pump.
. The mechanical seal adopts new hard and corrosion-resistant titanium tungsten material, which allows the pump to operate safely and continuously for more than hours.
. The overall structure is compact, small in size, low in noise, significant in energy saving, and easy to maintain. There is no need to build a pump room and it can work when submerged in water, which greatly reduces the project cost.
Factory address: Liying Industrial Park, Rencheng District, Jining City, Shandong Province
Consultation phone:
Online: