MB15-Y1.5KW continuously variable speed reducer basic type 1000-200

Product Features of B Series Continuously Variable Speed Reducer:
B Series Continuously Variable Speed Reducer has been proven in practice for many years to have a unique style among many families of continuously variable speed reducers. Due to the design structure of this series of products, it is suitable for operation. It has the characteristics of convenience and stable transmission, so it is widely used in food machinery, printing, paper machinery, rubber, plastic machinery, ceramic machinery, pharmaceutical machinery and various work production lines where the process parameters are variable and the speed is continuously changed. It is also available. During the trial production of new products, the optimal working speed of the machine is explored.
, B stepless speed reducer has high speed control accuracy and high speed control accuracy of .-turn. This is the leader in similar products.
, Height range and large speed range Rb/>.
, All transmission parts of this series of transmissions have been strictly processed, precision processed, ground, and have good contact and lubrication properties, so they operate smoothly and have low noise. ,long lasting.
The characteristic of the B transmission is that it can be effectively used in combination with various gear reducers, cycloid reducers, worm gear reducers and reduction motors, thereby increasing the output torque and realizing various applications in different situations. The minimum and maximum output speeds have good adaptability.
The output torque and power of the B transmission change with the change of the output revolutions, and have the mechanical characteristics of variable torque and variable power.
Produced and supplied by Shanghai Nuoguang. Basic type of continuously variable speed reducer (speed range)-r/power., output torque-.; both vertical and horizontal types can be installed. Here are some things to note: When the B continuously variable speed reducer leaves the factory, the traction oil is filled with enough oil and no oil is needed. The operating environment temperature of the speed reducer is -℃~+℃. The internal temperature rise of the machine does not exceed ℃. The high temperature shall not exceed ℃; the continuously variable speed reducer must be turned on before the speed can be adjusted. When adjusting the speed, the hand wheel should not be turned too fast. It is strictly forbidden to turn the speed control hand wheel when it is stopped. The speed regulating limit screw under the handwheel has been adjusted at the factory and must not be adjusted arbitrarily to avoid damaging the transmission parts; if the motor is replaced, be careful to retain the original motor flange with oil seal to prevent lubricating oil from flowing into the motor; continuously variable speed reducer and The lubricating oil replacement cycle of the worm gear reducer (except for maintenance-free) is: the lubricating oil should be completely replaced after the first use; if the working condition is poor, the lubricating oil replacement cycle should be appropriately shortened; if the gearbox with a gear reduction part is used The medium # deceleration grease should also be replaced accordingly.
Transmission range:
Basic type: -r/
Transmission with one-stage gear reduction (
.-): -r/
Transmission with two-stage gear Deceleration (
.-): -r/
Technical parameters:
Input power:.～
Speed adjustment range:～r/
Allowable torque&; .
B stepless speed reducer model
Basic horizontal type: BBBBBBBB; basic vertical type: BBBBBBBB.
First-level gear: B
This series of reducers are equipped with a unified standard series of ordinary three-phase asynchronous motors. The motors are pure copper motors. If you need frequency conversion, braking, explosion-proof, frequency conversion braking and other motors, please contact us or Independent remarks.
The continuously variable speed reducer is suitable for operation in both forward and reverse directions but must not exceed the rated torque.
Continuously variable speed reducer and worm gear reducer are only suitable for power transmission and cannot be self-locking.