Oil fume purifier

Product Name Oil Fume Purifier

Product Features High-voltage and high-static oil fume purifier is a process that ionizes greasy smoke through a high-voltage electric field, so that the greasy charge in the smoke is adsorbed under the action of the electric field force. On the oil collecting plate. During the oil discharging process, the electrostatic force acts directly on the oil particles, which can efficiently capture the oil mist in the flue gas. Even sub-micron oil particles can be effectively captured, with high oil removal efficiency, low self-consumption, low wind resistance and low operating costs. Low resistance to high temperature and humidity, no secondary pollution, long service life, and an automatic protection circuit that can automatically protect under overcurrent and overvoltage conditions.
Mainly used for removing oil fumes in kitchens and hotels.
Total number of models
Air volume cubic meters/hour
Zhengtong oil fume purifier adopts the dual functions of mechanical purification and electrostatic purification. The smoke-containing exhaust gas is sucked into the pipe by the fan and restricted to enter the primary device purification rectification chamber. The special structure in the chamber uses gravity inertial purification technology to gradually physically separate large particle size pollutants and achieve balanced rectification. The separated large oil droplets flow into the oil tank and are discharged under the action of their own gravity. The remaining small particle size pollutants enter the secondary device's high-voltage electrostatic field. The electrostatic field is divided into two stages. The first stage is the strong electric field of the ionizer, which charges the particles into charged particles. These charged particles are immediately collected by the electrode after reaching the second-stage dust collector. Adsorbed and partially carbonized. At the same time, the high-voltage electrostatic field effectively degrades harmful components and plays a role in disinfection and deodorization. Finally, the clean air is discharged outside through the filter grid.
Technical features of Zhengtong oil fume purifier
This product adopts enhanced high-voltage electrostatic technology to remove oil, with high efficiency, low self-consumption, low wind resistance, low operating costs, low resistance to high temperature and moisture, no secondary pollution, long service life
Power supply adopted High-voltage narrow-pulse high-frequency technology is used to produce the power supply in the form of negative corona discharge
The electric field structure adopts sawtooth board and wire board combination to increase the corona current and greatly improve the purification effect
The circuit design uses multiple sets of independent power supplies to work independently The states do not affect each other, which increases the life of the equipment and reduces the failure rate
The use of automatic protection circuits can not damage the electronic control in the state of overcurrent and overvoltage
The use of automatic reset circuits can ensure that the equipment can be restored after overcurrent and overvoltage protection. Automatic recovery does not cause permanent power outage
The use of computer monitoring system allows continuous ignition when the electric field breaks down and the high-voltage output is automatically cut off without causing fire hazards
The use of motor start-up delay allows the exhaust fan to drive away the dew point It can ensure the normal operation of the equipment
It adopts repeated multi-point grounding electric field and uses a full isolation device to make the outer frame non-conductive, which improves safety and ensures the safety of equipment and people.
The combination of this equipment and a multi-stage electric field unit can continuously capture and purify oil particles with high efficiency.
The electric field unit air equalization device and outlet network adopt a drawer-type design, which is easy to install and clean.