Stone plant crushing, screening and dust collector manufacturer

After the dust-containing gas enters the ash hopper from the air outlet, some coarse dust particles and condensed dust clusters fall directly due to inertia, playing the role of pre-dust collection. The airflow entering the ash hopper turns upward and pours into the box. When passing through the pulse pleated filter cartridge, the dust is trapped on the outer surface of the filter cartridge. The purified gas enters the clean room on the upper part of the filter cartridge, collects into the air outlet pipe, and is discharged. The dust cleaning of the dust collector is completed by the pulse solenoid valve and controller. Reasonable dust cleaning ensures the service life of the filter cartridge. When the dust collector is working, as the filtration continues, the dust accumulation on the surface of the filter cartridge gradually increases, and the resistance of the dust collector also gradually increases. When the set value is reached or the time is reached, the dust cleaning controller issues a cleaning command to remove the dust on the surface of the filter cartridge and fall into the dust hopper. The whole process is filtration, pulse cleaning, and air discharge. The stone factory dust collector has a uniform structure and good anti-explosion performance. It uses a high-pressure fan to blow back and clean the dust. It is not limited by air source conditions. It uses resistance to automatically control the blowback and cleaning to save energy and extend the use of cloth bags. It can be installed indoors in severe cold areas and other areas. It can be installed outdoors and can be widely used for dust removal in various mines and mineral processing plants. Mining crusher dust collector is used to deal with mine crushing. Dust is emitted during the drilling, rock drilling, blasting, shipping, crushing and other processes of open-pit mining or underground mining, which seriously pollutes the working environment and atmospheric environment. For dry rock drilling operations without dust prevention measures, the dust concentration on the working surface is per meter. Up to hundreds or thousands of milligrams. When there are no dust-proof measures in the underground crushing chamber, the dust concentration per meter. Up to thousands of milligrams.
Stone plant crushing and screening dust collector manufacturer Stone plant special dust collector Principle After the dust-containing gas enters the ash hopper from the air outlet, some coarse dust particles and condensed dust clusters fall directly due to inertia, serving as a pre-dust collection effect. The airflow entering the ash hopper turns upward and pours into the box. When the dust is removed through the pulse bag of the air box, the dust is cleaned one by one through the pulse online cleaning, which has a good effect.