Renxian manufacturer specializes in the production of small dough mixing machines

重量：

75kg

规格：

650*450*680mm

功率：

2.2kw

Product parameters
Model
Type
One-time processing
Weight
Dimensions
**
Power

Voltage< br/> /

Precautions
.
Before use, the machine should be fully inspected to see if there are any obstacles in each rotating part and whether the lubricating part is smooth and whether the inside of the bucket is clean.

Check whether the power supply is consistent with the voltage used by the machine and whether the safety ground wire is reliable. Install a leakage switch.

For single-phase mixers, please note that the power supply voltage deviation should not exceed the rated voltage. If the power supply voltage is higher or lower than the rated power of the motor, a voltage regulator or stabilizer should be used to supply power. use.

Connect the power supply to the test machine and pay attention to whether the rotation direction of the machine is consistent with the steering arrow. If the rotation direction is opposite to the arrow, you can swap two of the power supplies (three phases) to make the steering normal.

After testing the machine, wait for the machine to operate normally. Add flour into the dough hopper and stir (the amount of water can be determined according to the amount of flour). After mixing evenly, turn off the power and pull the positioning lock to tilt the box downwards. Remove the dough. (It is strictly prohibited to put your hands into the dough bucket when the machine is working).

After the work is completed, the machine should be cleaned and the box should be closed to ensure hygiene and lubricating oil should be added to each rotating part.
Fault phenomenon
Cause
Treatment method
Dough bucket The water inside seeps out along the agitator shaft
The sealing ring is damaged
Replace the sealing ring
Abnormal noise occurs during operation
Gears and lubricating parts are dry with oil
Tighten them The screws are loose
The bearings are damaged
It is necessary to add oil to the gears and lubricating parts
Tighten the loose screws
Replace the bearings
Start the switch and the machine does not rotate
The machine makes noises The capacitor is damaged
The silent switch of the machine is damaged
The load is too heavy and the surface is stuck
Other reasons
Replace the capacitor
Replace the switch
The surface is stuck in the machine removal bucket
Find professionals for repair
Product Features
There are different types of electric dough mixers. This machine is a flour mixer. It is suitable for use in enterprises, institutions, canteens, guest houses, large, medium and small restaurants, factories, schools, troops, etc. The machine is reasonably designed, easy to operate, and has high dough kneading efficiency. The parts of the machine are made of stainless steel or electroplated and the outer surface is in line with hygienic requirements.
Products can be customized according to customer specifications