Ren County Jin Xuyang long-term supply of multi-functional noodle machines

重量：

100kg

外形尺寸：

1000*480*850mm

功率：

380v-2.2kw 220v-2.2kw

Equipment name
Noodle-pulling machine, also known as new multi-functional noodle-pulling forming machine
Power supply
/(volt)
Output
Kilograms/hour
Equipment function
The multifunctional molding and pulling machine has the characteristics of one-time molding, rationing, production and packaging, and the product does not need to be weighed. It can be produced with three-phase () and two-phase () power supplies. It is easy and fast to operate, and only needs to change the mold. It takes just a few seconds to complete!
Variety of products produced by the equipment
Henan braised noodles, Northeastern stretched noodles (hand-pulled noodles), noodle pulling machine, Shaanxi, Shanxi pulled noodles, Anhui pulled noodles, Zhejiang, Fujian, La Ramen, Sichuan Dandan noodles , Hebei pulled noodles, Gansu Qinghai pulled noodles (slices), Xinjiang pulled strips, belt noodles, ordinary fresh noodles, dried noodles, dumpling wrappers, wonton wrappers, shell noodles, screw noodles, saozi noodles, vegetable noodles, multigrain noodles, leek leaf noodles Other products.
Features of the products produced by the equipment
Delicate taste, smooth, strong, resistant to cooking, continuous strips, not muddy soup, simple to operate, convenient and fast, adaptable to consumer groups in different regions of the country.
1
Machine Principle
The working parts of the whole machine mainly consist of five parts: kneading dough, conveying dough, stiffening, plowing, and stretching.
.When working, add the noodles into the noodle hopper, push the noodles to the noodle separator through the screw propeller (noodle conveying auger), and roll them through the forming die.
2
Machine maintenance and precautions
The lubrication system must maintain good lubrication of each transmission part. The gears exposed outside the machine box must be lubricated regularly. The bearings of each part must be lubricated every time. Inject grease in conjunction with monthly maintenance. The pressure bearing at the tail of the propeller should be injected with grease once a day. Please change the oil in the reducer of the body box every three months
. The electrical part of the electrical system is started directly by the single-phase switch of the host. , the exhaust system is started directly by a single-phase switch. Equipped with external power supply wiring and voltmeter.

Three
Installation, adjustment and operation of the machine
Before installation, parts in contact with food should be cleaned, decontaminated, and oiled.
.A hook plate is provided for installation and adjustment, a cleaning shovel and an oil gun. You need to bring your own wrenches, screwdrivers and other tools.
. During the trial operation, connect the grounding wire of the power box to prevent electric shock accidents. Start the machine to run dry. Check whether the machine is running in the forward direction. The rotation mark of the propeller is the standard. Remember to run in the opposite direction. Before dry operation, move the propeller to the rear end and avoid friction between the propeller and the cover to prevent parts from being worn. Cut the mixed noodles into long strips, drive and put the noodles into the noodle hopper, and check whether the forming mouth comes out and whether the noodles are smooth and hot. Check whether the molding die is tightened. Turn the pulley by hand until the stress is even and there is no obvious sticking phenomenon, and then install the guard.
pull