Year1
- 重量：
- 75kg
- 规格：
- 650*450*680mm
- 功率：
- 220v/380v
One-time processing
Weight
Overall dimensions
**
Power
.
Voltage
/
Precautions
.& Before use, the machine should be fully inspected for obstacles in each rotating part. , whether the lubricating part is smooth and whether the inside of the noodle bucket is clean.
.Check whether the power supply is consistent with the voltage used by the machine, whether the safety ground wire is reliable, and install a leakage switch.
. When using a single-phase mixer, please note that the power supply voltage deviation should not exceed &% of the rated voltage. If the power supply voltage is higher or lower than the rated power of the motor, a voltage regulator or voltage stabilizer should be used that is greater than % of the rated power of the motor. Power supply used.
. Turn on the power supply to the test machine, and pay attention to whether the rotation direction of the machine is consistent with the steering arrow. If the rotation direction is opposite to the arrow, you can swap two of the power supplies (three-phase) to make the steering normal.
.After the test, wait for the machine to operate normally, add flour into the flour hopper and stir (the amount of water can be determined according to the amount of flour). After mixing evenly, turn off the power, open the positioning lock, and tilt the box downwards& Take out the dough. (It is strictly prohibited to put your hands into the dough bucket when the machine is working).
.After the work is completed, the machine should be cleaned, the box should be covered to ensure hygiene, and lubricating oil should be added to each rotating part.
Cause
Treatment method< br/> Water in the dough bucket leaks along the agitator shaft
The sealing ring is damaged
Replace the sealing ring
Abnormal noise occurs during operation
The gear and lubricating parts are dry Oil
. Fastening screws are loose
. Bearings are damaged
. Gears and lubricating parts need to be oiled
. Tighten loose screws
. Replace bearings
The machine does not turn when the switch is started
. The machine makes noise and the capacitor is damaged
. The machine makes no noise and the switch is damaged
. The load is too heavy and the surface is stuck
. Other reasons
.Replace the capacitor
.Replace the switch
.Take out the stuck surface in the machine
.Find a professional to repair it
Product features:
Electric dough mixer It is divided into three types. This machine is a flour mixer. It is suitable for canteens, guest houses, large, medium and small restaurants, factories, schools, military units, etc. in enterprises and institutions. This machine is reasonably designed, easy to operate, has dough kneading function, and is highly efficient. The parts of this machine are made of stainless steel or electroplated exterior, which meets the hygienic requirements.
Products can be customized according to customer specifications
WhatsApp
