Year1
- 品牌：
- 天德立
- 规格：
- 双枪
- 重量：
- 60KG
Introduction to the hand-push double-gun marking machine
The road marking machine has a stable center of gravity: After redesign, it solves the problem of the unstable body of traditional products when marking zebra crossings.
The road marking machine is lightweight: After repeated trials, the machine body has become lighter, which greatly reduces the operator's labor intensity. Physical exertion is reduced and marking efficiency is improved.
The road marking machine is easy to control: the bucket handle control range is reduced from the conventional one, which is more precise and has strong controllability. It solves the problems of slow bucket retraction and uneven bucket edges and adopts a slider compression structure. It solves the problem of material leakage caused by compaction at both ends and large deformation in the middle of similar products
Use of hand-push double-gun marking machine: The marking machine is used for marking various roads and markings, etc. Its characteristics: smooth and smooth lines. high working efficiency.
Parameters of hand-push double gun marking machine
Model: D marking machine
Maximum flow rate (l/min): &.&/
Marking line width range (double Spray)
Maximum working pressure: &.&(&)
Maximum marking speed: &m/min
Maximum supported nozzles&. inches
Maximum supported number of nozzles&. inch nozzle
Power & engine: .H
Machine weight
Packing size: **
The hand-push double-gun marking machine has a few points
The marking is smooth and flat. Excellent surface quality
●High work efficiency, one piece of equipment is more than ten times that of manual roller coating
●Brand power, reliable quality
Main features of road marking machine
● Flexible operation, clear and full lines, and strong coating adhesion
●Can draw single lines, double lines, dotted lines and curves, etc., and the line distance and line width can be adjusted at will
●Removal & gun can be sprayed Pavement arrows and text markings can also be used as ordinary high-pressure airless sprayers, one machine for multiple purposes
Cold spray marking machine, normal temperature hand-pushed road marking machine, upgrade to Honda gasoline engine, the price remains the same
Operating procedures for the hand-push double-gun marking machine
1. ) Confirm whether the machine is filled with gasoline, engine oil, and hydraulic oil.
2. ) Before starting the machine, open the return valve and adjust the pressure regulating valve to the lowest level.
3. ) Adjust the gun to the required height before turning it on.
4. ) Open the machine and mix water or thinner first.
5. ) After turning on the machine, first exhaust the air and apply a little pressure to hold the return pipe until the material is discharged.
6. ) After turning on the machine and discharging materials, close the return valve and adjust the spraying completion and pressure.
7. ) After finishing the work, stop the machine first, remove the pressure, replace with thinner or water, and repeat the previous steps to rinse the machine until it is rinsed clean.
8. ) Before shipping the machine, be sure to turn off the oil circuit switch to prevent oil from mixing with gasoline.
The above prices are for reference only, and the actual quotation shall prevail.
Due to different product production batches and specific models, online quotations are not accurate. Please call or contact Wangwang for specific product prices, and the actual quotation shall prevail.
The freight charges are different depending on the shipping location designated by the customer. The freight time is days. Because there are many uncertain factors in logistics and transportation, such as road conditions, weather, etc., the arrival time of the goods will be slightly different according to the actual situation during the logistics transportation process.
Due to different product production batches, specific models, and shooting angles, the pictures are for reference only. For details, please contact our sales staff for specific verification.
Telephone: (WeChat)
Landline
Penguin
WhatsApp
