Suining Water Park Artificial Wave Pool Outdoor Swimming Pool Water Disinfection System Swimming Pool Filter

Suining Water Park Artificial Wave Pool Outdoor Swimming Pool Water Disinfection System Swimming Pool Filter When an ozone disinfection system is used, the water distributor and water collection device in the tank should be made of high-quality stainless steel. The material and anti-corrosion requirements of the water distributor and water collection device in the tank should be the same as the tank body. Currently, the finished pressure filter tank pressure levels on the market include: Pressure filters should be preferably vertical tanks.
The filter material is quartz sand, or polystyrene plastic balls, diatomaceous earth, anthracite, and fiber balls. Casting sand, whisk stone, etc.
The filter material composition and filtration rate should comply with the provisions of the "Design Code for Water Supply and Drainage of Swimming Pools and Water Amusement Pools".
The thickness of the support layer of the pressure sand filter: should comply with the provisions of the "Design Code for Water Supply and Drainage of Swimming Pools and Water Recreation Pools".
When choosing a finished pressure filter (including an ozone adsorption filter), you should request detailed information from the manufacturer and analyze the uniformity of water distribution and water collection, the particle size and thickness of the filter material, and the combination of filter material layers. Determine the filtration speed after research.
Diatomite pressure filter
① my country currently only has reversible diatomite filters, with a filtration speed of m/h. When the pool water quality requirements are high, the lower limit value should be selected. Suining Water Park Artificial Wave Pool Outdoor Swimming Pool Water Disinfection System Swimming Pool Filter
② The backwash water contains diatomite. A sedimentation tank should be set up to precipitate the diatomite before discharging it.
When choosing a gravity filter, you should obtain detailed product description information and quality review certificates from the supplier. At the same time, there should also be reliable measures to prevent safety accidents such as filter overflow caused by pool water due to sudden power outages.
Ozone adsorption filter
① The tank should be made of stainless steel. If it is made of carbon steel, its inner wall should be lined or painted with polyethylene plastic or paint.
② The adsorption tank filter material generally uses activated carbon. When its micropore surface area is at least m/h, the layer thickness is about mm and the filtration rate is suitable between m/h.
Ozone reaction tanks should preferably use polyethylene resin and fiberglass tanks. If carbon steel is used, the inner wall should be lined or painted with polyethylene plastic or paint. Suining Water Park Artificial Wave Pool Outdoor Swimming Pool Water Disinfection System Swimming Pool Filter