Year1
- 口径25-100：
- 扬程50米
>Pneumatic diaphragm pump has no rotating parts and no shaft seal. The diaphragm and pumped medium are completely separated from the moving parts of the pump and the workpiece medium, and the transported medium will not flow outward. leakage. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety
, the flow is spacious, and the passing performance is good. The maximum particle diameter allowed to pass through is up to mm. When pumping mud and impurities, there is little wear on the pump
. The lift and flow rate can be infinitely adjusted through the opening of the air valve (the air pressure is adjusted between r):
No need to fill or divert water. The suction lift is up to m. The head reaches m． Outlet pressure/㎡
, no need to use electricity. It is safe and reliable to use in flammable and explosive places
, and can be immersed in the medium to work:
, easy to use, reliable in work, just open and close the gas valve to start and stop. Even if the pump runs without medium for a long time or stops suddenly due to unexpected circumstances, the pump will not be damaged. Once overloaded, the pump will automatically shut down and have self-protection properties. When the load returns to normal, it can automatically start operation
. It has a simple structure and few wearing parts. The pump has a simple structure and is easy to install and maintain. The medium transported by the pump will not come into contact with moving parts such as valves and connecting rods. Unlike other types of pumps, the performance gradually decreases due to wear of rotors, pistons, gears, blades and other parts:
Viscous liquid (viscosity below 10,000 centipoise):
No need to lubricate with oil, even if it is idling. It also has no impact on the pump, which is the biggest feature of the pump.
WhatsApp
