XZD/G type cyclone dust collector is easy to manufacture, install and maintain.

type cyclone dust collector is easy to manufacture, install and maintain. The type cyclone dust collector is a new type of dust removal equipment. It is suitable for flue gas purification of / time layer-fired industrial boilers and heating boilers. It has been tested by users in actual operation. It has It has the advantages of high dust removal efficiency, moderate resistance, small steel consumption, small floor space, and convenient operation and maintenance. The dust concentration of the flue gas purified by it meets the requirements of national environmental protection efficiency. At the same time, the inner wall of the dust collector is coated with a millimeter-thick coating. Wear-resistant coating, it can also be coated with high temperature resistance, wear resistance and extended service life.
Type cyclone dust collector is a type of dust removal device. The desettling mechanism is to make the dust-containing air flow rotate, use centrifugal force to separate the dust particles from the air flow and capture them on the wall, and then use gravity to make the dust particles fall into the ash hopper. The / type cyclone dust collector consists of a cylinder, a cone, an inlet and an exhaust pipe, etc. It has a simple structure and is easy to manufacture, install, maintain and manage. It has been widely used to separate solid and liquid particles from airflow, or to separate solids from liquids. particle.
The main principle of the cyclone dust collector is to make the dust-laden airflow rotate, use centrifugal force to separate the dust particles from the airflow and capture them on the wall, and then use gravity to make the dust particles fall into the ash hopper. / type cyclone dust collector can be divided into tangential entry type and axial entry type according to the flow entry mode. Under the same pressure loss, the latter can handle approximately twice as much gas as the former, and the gas flow is evenly distributed. Ordinary/type cyclone dust collector consists of a simplified body, a cone and an inlet and exhaust pipe.
The / type cyclone dust collector has a simple structure, is easy to manufacture, install, maintain and manage, and has low equipment investment and operating costs. It has been widely used to separate solid and liquid particles from air flows, or to separate solid particles by weight in industries. Under normal operating conditions, the centrifugal force acting on particles is ~ times that of gravity, so the efficiency of the / type cyclone dust collector is significantly higher than that of the gravity settling chamber.
For more details, please log in