RCU smart micro-control switch

工作电压：

DC12V （电压范围 7-30v）

环境温度：

-２０℃～＋7０℃

尺寸：

92*91*42mm

Smart micro-control switch
1. Product overview
Smart micro-control switch is a multi-functional access control product based on capacitive sensing technology. It can replace the traditional access control dedicated control power supply, integrate breaking switch, doorbell, remote control, and door opening. Buttons and other functions can receive door sensors and fire alarm signals to work in conjunction. It has a stylish and elegant appearance, is easy to install and use, and has stable performance.
2. Functional features
The micro-control switch uses power, and there is no need to configure a professional access control power supply. It can be directly connected to the electric lock, receives the controller signal to open the door, and has door opening delay control (seconds)
. It has fire linkage and door sensor alarm functions. The micro-control switch has corresponding alarm sound and light prompts
. It can trigger the built-in doorbell to sound by receiving switching signals from the card reader or other buttons. The first doorbell tone is optional< br/> (Note that the doorbell selection function only supports the micro-control switch with remote control version)
, emergency door opening function, in an emergency, the micro switch can be toggled to forcefully open the electric lock and escape
, Capacitive induction switch with switch signal output function
Remote control version of micro-control switch (using wireless rolling code encryption technology, the remote control can complete the self-learning matching function with one click, remote control distance
Remote control version Added functions include one-touch door opening and one-touch doorbell sound selection.
For some customers who only use the access control as a door lock, a remote control version of the micro-control switch is configured. After connecting the electric lock, enter the door and press the remote control to open the door. Use induction to open the door when going out (you can also use a remote control to save costs and is easy to use
3. Technical parameters
, operating voltage (voltage range)
, ambient temperature ℃～＋℃
, Delay time seconds
, Load power
, Sensing distance
, Sensing angle
, Size**
Four wiring methods
, Wiring pins Definition
Note: To use a smart micro-control switch to connect to an electric lock, you need to short-circuit the + (+) pin to the common terminal.
, Usage method (for access control purposes)
Power the micro-control switch , connected to +,, can also be used to power a nearby access control card reader (pay attention to selecting an appropriate power adapter)
Connect the electric lock directly to the , pin of the micro-control switch, and short-circuit + to the end , at this time, the opening and closing of the door lock is controlled by the relay of the micro-control switch, and the breaking switch function is triggered
The door-opening signal line of the access control controller is connected to the pin, and the micro-control switch receives the door-opening signal of the access control controller to open the door
br/> Connect the doorbell control line of the access control controller to pin , and the doorbell function is enabled
Connect the door sensor signal line to pin , and the door sensor function of the micro-control switch is enabled (after delaying the door opening time, the door is not closed The micro-control switch will issue a sound and light alarm to prompt the door to close)
The fire alarm signal line is connected and the fire alarm linkage function of the micro-control switch is enabled (the micro-control switch will force the door to open after receiving the fire alarm signal)
Five , Application solutions
, Large-scale access control system engineering installation and maintenance simplified solutions
Traditional access control installations such as reading heads, switches, door magnets, electric locks, doorbells, buttons and fire control equipment are all wired to the main control. As a result, the circuit is complicated and long-distance intelligent control cannot be realized.
The smart micro-control switch integrates electric clavicle door opening control, doorbell room control, fire linkage control, and door magnet control, effectively saving door locks, switch buttons, door magnets, The line requirements from the fire alarm signal to the main controller only need to supply power to the control switch. The door lock line + door sensor information, fire signal line, and doorbell button can all be connected to the control switch. From the control switch to the main controller, only the power supply is required. The core network cable can fully support the line requirements of a card reader + electric lock. Eliminate complex wiring and achieve remote intelligent control.
, replacing single access control security solution
The smart micro-control switch contains a smart chip, integrates electric lock and switch door control, doorbell room control, fire alarm linkage control, door magnetic control function, and has remote control door opening function. A new access control method, its rolling code encryption remote control technology is extremely safe (the repetition probability is one in a million). The one-key matching function can easily add or remove remote controls. It is used in small offices, warehousing, computer rooms, etc. with fewer people entering and exiting. In such places, the access control controller can be omitted (the card reader is installed on the smart control switch inside the wall, which is directly connected to the electric lock and controls the electric lock switch to open the door with the remote control. When going out, it can be controlled by the sensor switch or the remote control. At the same time, It has functions such as broken door opening function, door not closed warning, etc.
, Special places, special needs solutions
Such as hospitals, fire escapes
, hospitals
Certain area wards of the hospital cannot be Contact, smart micro-control switch prompts a healthy and green life. Capacitive sensing is applied to product functions, which can be suitable for different places. Non-contact sensing opens the door, thereby avoiding possible cross-infection caused by multiple people touching the same object. It is convenient, healthy and hygienic. .
, Fire exit
In some occasions, the fire exit can only be opened after the fire signal is triggered in an emergency. The smart micro-control switch and fire linkage function can eliminate the need for access controllers. After the fire signal is triggered, the door will be kept open immediately and the alarm will sound.