ANFC Wing Gate

机箱尺寸：

1200长*300宽*1000高（MM）

最大通道宽度：

600mm

工作环境：

室内、室外（阴棚）

Equipment Introduction
The bridge-type inclined wing gate is a high-tech product mainly for intelligent management of personnel passages. It is an upgraded product of the intelligent tripod turnstile and swing gate. This product has fine processing, complete functions and high grade. It is mainly Used in high-end residential areas, smart buildings, hotels, subways, docks, clubs and other high-end places.
This device organically integrates mechanics, electronics, microprocessor control and various identification technologies, making it easy to use compatible card, card, barcode card, fingerprint and other card reading and identification equipment. Identity recognition system equipment and the use of reliable safety protection devices, alarm devices, direction indicators, etc., coordinate to achieve intelligent control and management of channels.
Divided into single movement for single channel and multi-channel dual movement for multi-channel
Main functions and features
Qualified product features
) With fault self-check and alarm Prompt function to facilitate user maintenance and use
)The operating status of the equipment can be programmed through the built-in small button on the main control board
)Anti-pinch function, when the swing arm is blocked during the reset process, Automatic rebound or the motor automatically stops working within the specified time, and the intensity is very small
) Sound and light alarm functions include illegal intrusion and tailing alarms
) Anti-rush function, when the gate opening signal is not received When the gate is opened, the swing arm automatically locks
) Telescopic arm synchronization function
) has an automatic reset function. After the gate is opened, if there is no passage within the specified time, the system will automatically cancel the user's permission for this passage. , the system defaults to automatically reset within seconds after opening
) The channel will automatically open after a power outage, and automatically close after power on
) Can be connected to a variety of card reading devices
) Can be one-way or two-way Control personnel entry and exit
) Remote control and management can be realized directly through the management computer
Extended functions
) Counting function
) Chassis lengthening, telescopic arm material selection.
, Main structure and configuration
◇Standard chassis
◇Telescopic arm
◇Main control panel
◇Transformer
◇Motor
◇Movement and transmission parts set
◇Infrared pair
◇Alarm (light)
◇Direction indicating plate
, standard technical parameters
◇Chassis Dimensions length*width*height
◇Telescopic arm length
◇Maximum channel width
◇Weight
◇Chassis material domestic standard stainless steel
◇Power supply voltage,
◇Drive motor DC brush motor
◇Input interface dry contact signal or level signal or pulse signal with pulse width>, drive current>
◇Normal service life of 10,000 times
◇Communication interface Standard
◇Indicator lights
◇Card reading windows
◇Inspection openings
◇Traffic speed people/minute
◇Gate opening and closing time in seconds
◇Seconds of time required to enter the traffic state after powering on
◇Automatic reset time in seconds after a fault occurs
◇Working environment indoors and outdoors (shade)
◇Temperature ℃℃
◇Relative humidity, no condensation