- 抗压强度:
- 65
- 粘接强度:
- 2.4
- 透水量:
- 15
Epoxy repair mortar (epoxy resin cement)
Contact manager Ma
Tel
Product features
It is impermeable, anti-freeze, salt-resistant, alkali-resistant, It is resistant to weak acid corrosion and has strong adhesion to a variety of materials.
, can be applied on wet substrate surfaces without drying, and can be hardened in humid environments or underwater.
, easy to operate and construct, similar to ordinary cement mortar construction, easy to clean, can be cleaned with water.
Product use
Used for anti-impact wear, anti-cavitation and anti-freezing and thawing protection of the flow surface of hydraulic structures, as well as repair after damage.
, used for defect repair, reinforcement and reinforcement of concrete buildings.
, used for the protection and repair of concrete or metal components against acid, alkali and salt corrosion in chemical industry, petroleum, factories, docks and other industries.
, used for anti-wear protection and repair of engineering parts such as highways, bridges, airport runways, workshops, etc.
, used for waterproofing, impermeability and anti-corrosion of concrete reservoirs, and acid-resistant brick pasting.
Implementation standards
Technical parameters
Epoxy resin cement
Construction technology
1. Base surface treatment
Treat the surface of the concrete foundation and clean the base surface The emulsion, cement slurry surface or loose particles are exposed to the solid base, and surface sand, dust, grease, etc. are removed.
2. Material preparation
Check the product packaging, specifications, model, and production date to ensure that the product is within the shelf life specified by the manufacturer.
Open the lid of the packaging barrel and check that the contents are free of damage, leakage, moisture and agglomeration. The assembly ratio in each barrel is 100%.
When mixing the ingredients, first pour the ingredients into the bucket according to the proportion and mix evenly, then slowly add the ingredients while stirring until it becomes a uniform clay.
3. Construction Instructions
According to the construction requirements of the project, use a spatula to apply the prepared clay to the repaired area. When applying, compact and polish at the same time. It can be put into use within 1 day after completion.
, the reference dosage is about /.
Notes
The prepared glue should be used up within minutes. It is strictly forbidden to use glue that has not been mixed evenly or is in an initial setting state.
The ingredients and ingredients will appear slightly stratified after being stored for a long time. Shake well before use.
Packaging, storage and transportation
The standard packaging specification is/barrel, non-flammable and non-explosive, and can be transported as general cargo.
. This product should be stored in a dry, cool place, and the storage period is one month.