Year1
- 规格：
- 客户要求
Shenzhen Heyiyou
Epoxy resin high temperature glue is a two-component adhesive that requires high temperature curing. It is flame retardant, has good temperature resistance, is water resistant after curing, and has Certain bonding strength and sealing effect, easy to use. It is mainly used for sealing and bonding of high-temperature resistant components, and its working temperature ranges from
℃
～
℃
. It can reach
℃
in a short time.
, Performance
Appearance
Before curing
It is a gray viscous liquid,
It is a yellow powder and after curing, it is a yellow hard solid.
Tensile shear strength after bonding,
℃
Cure
Pressure resistance,
℃
Usage
Suitable for resistance
℃
Gluing and sealing of high-temperature components, such as high-temperature resistant ceramics, fireproof materials, metal sealing grooves, etc.
, Usage
Surface treatment The glued object should be clean, dry and free of oil.
Glue Mixing
Mix the
:
:
(weight ratio) evenly, and apply or fill it in the place that needs to be glued or sealed. Note that the glue should be prepared and used immediately. The mixed glue should be used up at one time. If agglomeration occurs, use should be stopped.
Excess glue can be wiped off with a clean rag dipped in water.
Curing
Curing conditions
℃
And with furnace cooling, it basically does not solidify at room temperature.
Processing or Experimentation
After the rubberized parts are completely cured, they can be transferred to the next process for processing.
, packaging, storage and transportation
This product is packaged in
plastic barrels or iron drums,
as a set.
The glue should be stored in a dry, cool, ventilated warehouse without corrosive gases, away from direct sunlight, away from heat sources and sources of goods. The humidity in the warehouse should not be higher than
and the temperature should not be higher than
℃
, provided that the above storage conditions are followed, the original unopened product is valid for one year from the date of production.
This product is transported and stored as non-dangerous goods.
. Note
If there are
agglomerations before mixing, they should be ground with a mortar and then mixed with the
group. In order to prevent the formation of bubbles during curing, it can be left at room temperature for a few days and then cured at a high temperature.
WhatsApp
