DKJ210 electric head | electric actuator | quarter-stroke actuator | lubricating oil pipeline

型号：

DKJ-210

输出力矩：

100NM

信号：

DC4-20mA

Electric head | Electric actuator | Angular stroke actuator
The electric actuator is the execution unit in the type electric unit combination instrument. in automatic control systems. It receives the automatic adjustment signal (~) from the adjustment unit or the remote manual operation signal from the operator, and converts it into the corresponding angular displacement (~) or linear displacement, with a certain mechanical torque (or thrust) and The rotary (or linear) speed control adjustment mechanism (valve, damper or baffle completes the adjustment task.
The electric actuator is a position servo mechanism powered by a two-phase servo motor. Its output shaft has two movement modes. Displacement (type angular stroke electric actuator) and linear displacement (type angular stroke electric actuator). The electrical principles of the two are basically the same, and the difference is mainly in the mechanical part of the reducer. This section only introduces the type angular stroke electric actuator.
The type angular stroke electric actuator can cooperate with the electric operator to realize the automatic adjustment of the adjustment system and the mutual switching of manual remote operation. When the switch of the electric operator cuts to the manual position, the forward and reverse directions of the operator can be used. The operating switch (or button) directly controls the on and off of the two-phase motor power to achieve remote operation of forward and reverse rotation of the actuator output shaft. When the actuator is powered off, the handle on the actuator can also be shaken on site Operate on site.
Yangzhou Zhongnan Control Equipment Co., Ltd.