N-300 colored ceramic tile grouting agent_Xi'an grouting agent manufacturer

Overview Factory direct sales phone number
Colored ceramic tile caulking agent
★ The scope of application of ceramic tile caulking agent is suitable for indoor and outdoor filling of ceramic tile joints with a width of . ★ The base treatment grouting agent should be used after the tile adhesive has dried. The joints of the tiles should be clean and free of loose material. ★ Notes * Please use up the mixed caulking agent within hours
2. Detailed description of tile caulking agent
Colored tile caulking agent
★ Applicable scope suitable for indoor and outdoor filling Tile joints of width .
★ Base layer treatment
The grouting agent should be used after the tile adhesive has dried. The joints of the tiles should be clean and free of loose material.
★ Precautions
*Please use up the mixed caulking agent within an hour
*It should be used at a temperature of +~+℃
*Please use the caulking agent after it is completed Carry out hourly moisture curing
*The water absorption of different ceramic tile sides, the amount of water added when mixing, and the ambient temperature/humidity during use may slightly affect the color of the cured grout
*This The product contains cement, which will produce an alkaline reaction when it comes in contact with water. Please pay attention to proper protection of your eyes and skin. If your skin is stained with slurry, you can rinse it with clean water. If your eyes are stained with slurry, please seek medical treatment in time and keep it out of reach of children
★Construction technology of ceramic tile caulking agent
Pour the entire package of colored caulking agent into an appropriate amount of clean cold water according to the following proportions, and stir until it is even and free of lumps. Water is required for each kilogram of light gray caulking agent, and water is required for every kilogram of other color caulking agents.
Use a rubber-bottomed ash spoon to squeeze the mixed grouting agent into the reserved joints along the diagonal direction of the ceramic tiles.
After the grouting agent is initially cured, use a slightly damp sponge to clean off the excess grouting agent on the surface of the tiles.
After that, use a dry cloth for further cleaning. Cured colored caulking agent is waterproof.
★Important Statement
Any printed color samples provided by our company are only for customers' reference when choosing, but are not used as a basis for acceptance. The actual products may vary slightly from batch to batch. Customers are asked to use actual samples when selecting products. The product may contaminate the surface of ceramic tiles, especially ceramic tiles with rough, porous and highly absorbent surfaces and various natural stones, marbles, etc. The working hours should be strictly in accordance with the operating requirements specified in the instructions, and they should be cleaned in time. If necessary, local tests should be done first. The company is not responsible for the jointing agent contaminating the brick surface due to improper operation. The process of filling, compaction, and polishing in the instructions for use must be strictly followed. The company is not responsible for the loose jointing agent caused by improper operation. Responsibility for shedding, powder loss, etc.
★Please store ceramic tile grouting agent in a cool and dry place. The unopened shelf life is one month.
Xi'an Swenger Building Materials Co., Ltd. manufacturer contact number is the manager
/Caulking agent_Copy_Copy