Xi'an tile adhesive | Xi'an tile adhesive manufacturer | vitrified tile adhesive | 20KG/bag

Type ceramic tile adhesive
★ Categories and uses of ceramic tile adhesive
Universal type (commonly known as ceramic tile adhesive) is suitable for pasting ceramic tiles on interior and exterior walls and floors, and can also be used for waterproofing membrane plastering protection layer.
Strong type (commonly known as strong adhesive powder) is suitable for pasting thin marble, large stones, granite, etc. on indoor and internal and external walls and floors.
Styrene board type (commonly known as insulation board adhesive) is suitable for pasting polystyrene boards or rock wool boards indoors, on exterior walls, ceilings and other parts.
★ Ceramic tile adhesive base treatment
Make sure the substrate is strong and flat, with no hollows, and the base surface is clean and free of oil stains, release agents, floating dust and loose objects and other stains. For highly absorbent base layers, moisten them with clean water.
★Technical parameters of ceramic tile adhesive
, Adhesion performance
>

Bonding strength

Compressive shear strength

British Standard



British Standard



Ceramic tiles~concrete



br/>


br/>
, aging resistance
> Conditions

Room temperature Next day

After soaking in water

After wet and heat test

After freezing and thawing times

Bonding strength










★Tile adhesive construction technology
. Take out the adhesive powder from the plastic bucket and pour clean cold water into the bucket to the assembly line marked on the bucket. (The amount of water added per kilogram of bagged binder is approximately)
Pour the binder powder into the bucket and stir with an electric mixer until it is even and free of lumps.
First, use a special scraper to apply a full batch of mortar to the base surface, and then use the toothed side of the scraper to pull out stripes in a straight line or shape (the plane of the scraper and the plane of the base intersect to form a degree to degree, it is recommended to Use scrapers with different tooth depths according to the size of the tiles).
The ceramic tiles do not need to be soaked in water. They only need to be pasted on the wall or floor in order and compacted.
. The position of the tiles can be adjusted within the specified time to achieve the best effect. Please remove excess glue before the glue dries.
★ Comparison table
Troweling process and traditional cement mortar method
Comparison of ceramic tile construction
> Comparison items

Type adhesive troweling process< br/>
The traditional cement mortar gluing and pasting process



Recognized by countries around the world

All believe that it should be promoted New technology products

Not recommended for use (Beijing Construction Committee document)



Material selection

High molecular polymer, High quality cement, quartz sand, etc.

Polyvinyl formal construction adhesive (such as, glue, etc.), cement, river sand (containing water, mud)



Hollow drum Phenomenon

Eliminate

Exist, rework



Falling off phenomenon

Will not occur

Frequent occurrence, causing harm, affecting city appearance



Market price

(universal type)

About/



Per dosage






/>
Bonding layer thickness







Cost per construction

Yuan

Yuan



Cost comparison




< br/>

Implement standards

Meet/Standards
Meet standards

Not meet


/>
Environmental performance

Complies with the "Technical Requirements for Environmental Labeling Products" standard

Does not comply



The total weight of transported goods/



is times the former



The total weight of the building/



, is times the former



Increase indoor space

Increase

Reduce


Comparison between troweling process and adhesive/adhesive tile construction
>

Adhesive troweling Technology

Rubber/glue construction technology

Material selection

Mainly inorganic materials, non-toxic, odorless and pollution-free

Mainly made of organic chemical raw materials, with peculiar smell

Aging resistance

More than 1 year

About 1 year

Applicable Scope

Suitable for walls, floors, interior walls, and exterior walls. It can also be used as an interface agent or leveling material.

It is only suitable for small areas of interior walls and cannot be used for base leveling.

Pasting method

Generally, full gluing is used, but in special cases, spot gluing is also used

In general, spot gluing is used, and in special cases where there is an empty drum, it can also be used. It is full of viscosity, difficult to operate, and the cost is high.

Water resistance, heat and humidity resistance,
Freeze-thaw resistance

Excellent performance

Poor, easy to age


★ Applicable environments for tile adhesive
*Indoor, outdoor, wall, floor, pool, bathroom, kitchen, cold areas.
★Notes on ceramic tile adhesive
Generally, tiles do not need to be soaked in water. For ceramic tiles or base layers with strong water absorption, soak them in water for a few minutes or spray water to moisten them first.
. The initial strength is low. Heavy load on the ceramic tile surface should be avoided to achieve the use strength.
. Antifreeze type is available in winter and can be constructed within ℃.
★Tile adhesive storage and transportation
The packaging specification of this product is/bag.
Store in a cool and dry place. Pay attention to moisture-proof, moisture-proof and sun-proof during storage and transportation. The storage period is one month.
This product is non-toxic, odorless, non-polluting, non-flammable and non-explosive, and can be transported as general cargo.
Manufacturer contact number to call the manager
/ Tile adhesive