JS polymer cement-based waterproof coating_Xi'an professional waterproof coating manufacturer

Sales hotline of polymer cement-based waterproof coating
Waterproof coating product introduction
Swenger waterproof coating polymer cement-based composite waterproof coating is a two-component composed of high molecular polymer emulsion and inorganic powder Composite waterproof coating forms a high-strength and tough coating film after mixing. It has the dual advantages of high elasticity of organic materials and good durability of inorganic materials, and has outstanding waterproofing effect.
Features of waterproof coating products
Apply directly to wet or dry base surfaces, and have good adhesion to the base surface.
The membrane has high strength, high elasticity, good water resistance, weather resistance and durability.
Full reliability, simple construction and short construction period.
Toxic, odorless and pollution-free.
Prepared in various colors.
Technical parameters/
> Serial number

Test items

Technical indicators



Solid Content/





Tensile strength

No treatment/
Retention rate after heat treatment/
Retention rate after alkali treatment/
Retention rate after water immersion treatment/
Retention rate after ultraviolet treatment/









Elongation at break

No treatment/
Heat treatment/
Alkali treatment/< br/> Water immersion treatment/
Ultraviolet treatment/








< br/> Low temperature flexibility (stick)





Bond strength

No treatment/
Moist base,
Alkali treatment/
Water immersion treatment/







< br/> Water impermeability

Water impermeability



Impermeability (mortar back surface)/

< br/>

Scope of application of waterproof coating
Widely used in waterproofing, repair and decoration of new and old roofs, basements, exterior walls, toilets and baths, tunnels, bridges, pools and other construction facilities Waiting for projects. And it can be constructed directly on various waterproof layers (waterproof membranes, polyurethane waterproof layers, etc.).
Key points for waterproof coating construction
Layer requirements The base layer of the waterproof coating must be flat, strong, clean, the surface of the base layer must be free of open water, and the yin and yang angles should be made into arc shapes.
Please follow the proportion of materials marked on the packaging. The amount of water added is an adjustable component. The viscosity of the paint can be adjusted by appropriately adjusting the amount of water added to meet the construction requirements in different parts.
For material operation, first pour the liquid material and water into the mixing bucket, and slowly add the powder material into it while stirring continuously with a portable mixer. Stir for at least 10 minutes. Stir evenly and it can be used only when it becomes slurry without clumps.
The amount of each single coat of membrane construction/total thickness of the coating film should comply with the design and relevant specification requirements, and detailed nodes should be evenly coated.
Transportation and Storage of Waterproof Coatings
Waterproof coatings are non-flammable and explosive materials. During transportation, they should be protected from rain, exposure to the sun, freezing, extrusion and collision, and the packaging should be kept intact.
Water paint should be stored in a dry, ventilated, cool place with a temperature of ℃.
Under normal transportation and storage conditions, the storage period is years.
Precautions
Water paint cannot be applied below ℃ or in the rain. It should not be applied in a particularly humid and non-ventilated environment, otherwise it will affect the film formation.
Good materials should be used up within hours, otherwise they will dry out and affect the quality of the coating film.
The surface drying time of the water coating film is about an hour. After the surface is dry, the second application can be carried out. After it is completely dry, other decorative construction on the surface can be carried out. It takes about a day to completely dry, and the humid environment should be extended appropriately.
Water paint cannot be drank.
Manufacturer contact number to call the manager
/ Waterproof_Copy