Year1
- 产地：
- 江苏淮安
- 规格：
- 国标
- 不透水性：
- 0.3 MPa、30min不透水
Introduction to Leak Stopping King
Leak Stopping King refers to a high-performance, latest high-tech product that integrates inorganic, alkali-free, waterproof, moisture-proof, crack-resistant, anti-seepage and leak-stopping functions.
Its characteristic is that it solidifies quickly and its density and strength are much higher than the current high-grade concrete! It starts to solidify one minute after mixing, and finally solidifies in three to four minutes. The compressive strength can reach the above in one day and can be used in wet conditions. Construction is carried out directly on the base surface for emergency rescue, road restoration, etc. It can be restored to its original state in one hour and can be opened to traffic in four hours for waterproofing projects. With water and pressure, the leakage will stop immediately. The product is easy to operate. Just add water to mix and it can be used. No need Toxic, harmless and non-polluting, Portland cement is added to adjust the retarding time and the building has the same lifespan.
Scope of application
Non-retractable concrete or mortar structures such as kitchens and bathrooms, basements, and roofs. It can enhance the waterproofing of the arcs at internal corners and around pipes, as well as various wall pipes and sleeves. It has excellent results in repairing defects around pipes and internal corners. It can also be used to bury hooks, seal equipment railings, etc.
Main features
This product has the function of quickly plugging water with water. The initial setting time is only two minutes and the final setting time is 15 minutes.
This product can be applied on both the front and back surfaces, and is combined with the base layer to form a non-aging whole, with extremely strong water resistance.
. The solidification time of this product can be adjusted arbitrarily according to user needs. Waterproofing and bonding are completed in one go, and the bonding force is strong.
This product has no corrosion to steel bars.
This product is non-toxic, odorless, environmentally friendly, non-flammable and can be used in drinking water projects.
Scope of trial
, roof concrete flat, sloped roof, gutter, awning and various irregular shaped roofs
, underground building concrete interior wall, exterior wall, ground, elevator pit, Underground tunnels, cable wells, external pipe waterproofing
, ground building bathrooms, kitchens, roof gardens, reservoirs
, joint expansion joints, construction joints, settlement joints, wall pipes, downfalls.
5. How to use
Requirements for the base layer: The base layer must be clean, free of sand, loose, and hollow. The moisture content of the base layer should be within the range. The moisture content of the waterproof base layer of ground and underground buildings should be within The inner construction level should be provided with one exhaust hole per square meter.
. The amount of material generally requires grams per square meter, and the thickness is meters. The scraping must be uniform in batches, and the up and down scraping directions must be crosswise. The interval between each time depends on the construction environment and the degree of curing of the coating film. It is generally not less than an hour and is subject to a non-stick feel. According to the design requirements, one or more layers can also be applied.
. Coating film protection In order to extend the service life of the waterproof layer and ensure the quality of the project, it is recommended to make a protective layer after the coating construction is completed. Shangren Roofing makes a protective layer of cement mortar on top of the coating film.
6. Precautions
. Do not expose the coating to rain before it is cured, and do not allow people to walk or perform other operations
. During construction, contact with open flames and water is strictly prohibited
, normal temperature Lower shelf life months.
WhatsApp
