High pressure pipe

产地：

江苏淮安

规格：

国标

One material
Inner pipe
Covering
Two parameters
Three finished products
Cut to the length required for construction, and then add joints at both ends to form the finished product.
Four Usage Methods
In order to maximize the function of this high-pressure pipe, we hope that you can follow the following usage methods.
Before use, you must first check whether there are any abnormalities, such as appearance deformation, whether the joint is pressed tightly, and the double-ended spring rubber sleeve must be inserted into the joint. This spring rubber sleeve is the best way to protect the joint and the high-pressure pipe. Vulnerable areas can also prevent the tube from being damaged to a certain extent when the tube is collected, which may cause the tube to burst or leak during use.
When taking over the pipe, special attention must be paid not to tighten it too much, so as not to damage the joint and deform it, thereby damaging the structure and causing leakage of agent, making it unusable.
Be sure to test the pressure when using it for the first time, that is, check the pressure of the high-pressure pipe and check whether there are any abnormalities, such as a big belly, leakage, or burst pipe. If the above does not happen, it means everything is normal. , if there is any abnormality, this high-pressure pipe cannot be used and is strictly prohibited. It should be returned to the seller or sales company, and so on.
The normal working pressure is - for the safety of the construction workers, it is strictly forbidden to exceed this range, and they must wear helmets, masks, and safety work clothes just in case, because there is no absolute safety for each product. It involves the operator's skills and reactions, as well as the product's life, usage time, and machine stability.
Although a high-pressure pipe is not broken, it does not mean that it is good. After being used for a long time and left for a long time, it will age, and its pressure resistance will decrease. As the safety decreases, then It's time to get a new one.
5 Maintenance and Storage
The maintenance of high-pressure pipes is very simple. Just clean the residue in the pipe with the cleaning agent methanol in a continuous cycle until it is clean, and then clean it with a clean cleaning agent. It is best to leave some cleaning agent in the tube to prevent the tube from becoming clogged if it is not cleaned thoroughly.
When packing up high-pressure pipes, it is strictly prohibited to fold them in half or into a flat shape or hang them for storage. This is because folding or flattening them will damage the structural organization, and hanging them for a long time will cause them to become flat. Therefore, it is recommended to store them in a circle, and hanging them is prohibited. hang.
If you have any concerns about use, please ask the purchaser.