- 规格:
- 25千克/桶
Product Features
Resistant to sunlight aging, protects the middle and bottom coatings
Easy to use. Single component, stir well after opening the bucket and it is ready to use. It can be constructed using various methods such as high-pressure airless spraying, brushing, and roller coating.
It dries quickly and construction is not restricted by seasons. It can be applied normally from ℃ to ℃ and can be recoated at intervals.
It has good adhesion to steel, concrete and wood.
Good anti-corrosion performance. Chlorinated rubber is an inert resin with extremely low permeability of water vapor and oxygen to the paint film. It has excellent water resistance, salt resistance, alkali resistance, various corrosive gases, mildew resistance and flame retardant properties, and good weather resistance and durability. .
Easy to maintain. The adhesion between the old and new paint film layers is good, so there is no need to remove the strong old paint film when recoating.
Scope of application
It is suitable for the anti-corrosion of steel structures, oil tanks, gas tanks, pipes, chemical equipment and factory buildings on docks, ships, and also for the decoration and protection of concrete surfaces in underground corridors of wall pools. Not suitable for environments in contact with benzene solvents.
Instructions for use
After opening the bucket, stir evenly, adjust the viscosity with chlorinated rubber thinner and apply directly.
The steel surface should be clean of oil stains. It is best to use sandblasting to remove rust to the lowest level, preferably to the lowest level. When construction conditions are limited, tools can also be used to remove rust to a certain level. After the steel surface treatment is qualified, it must be painted as soon as possible before rust returns, and a chlorinated rubber coating should be applied. The concrete must be completely dry, loose material on the surface must be removed, and the surface should be smooth and solid, and then coated with chlorinated rubber paint.