Jinhu Hongchuang on-site direct-reading side-mounted magnetic flip column liquid level meter

The series of side-mounted magnetic level gauges are direct-reading liquid level instruments and transmission units installed on site. They are made of high-quality stainless steel and manufactured in accordance with the magnetic level gauge standards promulgated by the Ministry of Chemical Industry. Lined magnetic level gauges are also provided. Column level gauge, the liquid-contacting part of the liquid level gauge is made of all materials. It can be widely used in various petrochemical and chemical enterprises. It can measure the liquid level of any kind of acid, alkali, strong oxidant and other process media of any concentration. After being amplified by the circuit and converted into a standard current signal, it can be used in various environments from low temperature to high temperature, vacuum to high pressure, etc. It is an ideal liquid level measurement product for industrial sectors such as petrochemical industry. Depending on the installation location in the container, side mounting and top mounting are available. Depending on the working medium, stainless steel and engineering plastic materials are available, and the materials are also suitable for corrosive media such as acids and alkalis.
▲ Features
Using the float as the measuring element, the magnetic steel drives the column display, and no energy is needed.
Equipped with upper and lower limit switch outputs, remote alarm and limit control can be achieved.
Equipped with a transmitter, remote liquid level indication, detection and control can be achieved.
▲ Main technical indicators
Installation form and content
Side-mounted
Top-mounted
Installation distance measurement range
Stainless steel
Working pressure
Media density
/
/
Connecting flange
Stainless steel
Flange
Flange
Flange
Flange
Main body material
Working pressure
Medium temperature
℃℃
Ambient temperature
℃
Indication error
Medium viscosity
Upper and lower limit switch output
Control sensitivity
Output contact capacity
Contact life time
Explosion-proof characteristics Ⅱ intrinsically safe type
Electric remote transmission continuous display
Accuracy
Output load
Output signal output power supply
Output two-wire system
Explosion-proof characteristics Ⅱ intrinsically safe
▲ System configuration and wiring
Upper and lower limit switch output
It consists of a reed switch and a converter with self-maintaining function. The reed switch and converter are installed on site and in the control room respectively. The converter provides three pairs of contact switches.
Electric remote transmission
It consists of two parts: measuring unit and transmission unit.
Intrinsically safe explosion-proof
With intrinsically safe explosion-proof, upper and lower limit switch output type
The explosion-proof switch consists of a reed switch and a safety barrier with relay contacts, which can directly provide the user with a pair of normally open or normally closed contact. If users need more contacts, special designs and orders can be made.
Intrinsically safe explosion-proof remote transmission type
Suitable for use in Class II electrical equipment, factory grade gas, maximum surface temperature group ℃.
Precautions for use
The transmitter housing is equipped with an external ground, and the user must ground it reliably when using it.
The application of the safety barrier should comply with the relevant instructions for use.
The connecting cable between the transmitter and the intrinsically safe end of the safety barrier is a two-core shielded cable. The cross-sectional area of the core wire and the allowable distributed capacitance of the cable are.
▲ User-prepared flange
Installation form
Main material
Nominal diameter
Nominal pressure
Side mounting
Stainless steel
Top Installed
Stainless steel