Year1
- 分子量：
- 18-20million
- 离子度：
- 23-25%
- 固含量：
- 89%
Polyacrylamide flocculant for fragrance making plays a thickening role in the fragrance making process. Dissolve the solid polyacrylamide flocculant in water according to the corresponding proportion and wait until it is completely dissolved. Add it to the fragrance raw materials and mix. The addition ratio depends on the molecular weight of the anionic flocculant. Anionic flocculant with a molecular weight of 10,000 is usually one thousandth or five thousandths. For those with low molecular weight, gradually increase the dosage of solid polyacrylamide
Advantages of polyacrylamide specially used for fragrance making
Polyacrylamide specially used for fragrance making can quickly improve the performance of fragrance and greatly improve the quality of fragrance products. The special polyacrylamide produced by Kaibiyuan manufacturer for fragrance production has extremely strong adhesive force, good cold solubility and super film-forming properties. It is also economical in dosage and only requires half of the ordinary fragrance binder. You can achieve better results!
Polyacrylamide has high viscosity and is odorless when burned. It burns well, has high hardness and smooth finish, and does not soften. It is easy to use, has stable performance, is non-toxic and harmless to the human body, and is the most ideal product for making incense. Compared with traditional processes, it can significantly reduce production costs and is twice as viscous as traditional elm powder. The finished incense products after use have the characteristics of fragrant gray white, good bending resistance, and strong flexibility.
Instructions for use of polyacrylamide specially used for perfume making
Powdered products cannot be directly put into sewage. It must be dissolved in water before use and its aqueous solution is used to treat sewage.
The water for dissolution should be clean water. Tap water should not be sewage. It should be at normal temperature and generally does not need to be heated. However, it dissolves slowly when the water temperature is below degrees Celsius. If the dissolution temperature is above degrees Celsius, the polymer will accelerate degradation and affect its use effect, and water with strong alkali and high salt content is not suitable for preparation.
The choice of polymer solution concentration is recommended.
When dissolving, add the agent slowly to the rotating water. Do not add it all at once to avoid affecting the dissolution speed or blocking the pipeline due to insufficient dissolution.
To be dissolved, it must be prepared immediately before use. If left for a long time, it will degrade and affect the use effect. When the solution concentration is , the non-anionic polymer aqueous solution should be stored for no more than one week, and the cationic polymer should be stored for no more than one day.
The stability of the solution is related to the concentration. The more concentrated the solution, the longer it will be stored. However, the highly concentrated solution cannot be used directly for water treatment and needs to be diluted before use.
Iron ions are the catalyst that causes the chemical degradation of all polyacrylamides, so when preparing, transferring and storing polyacrylamide solutions, try to avoid the entry of iron ions. Equipment in contact with the solution is best made of stainless steel, plastic, fiberglass or carbon steel coated with resin.
When adding to wastewater, use low concentration to ensure uniform mixing.
When using, it is necessary to determine the type and optimal dosage of the medicine through experiments.
The packaging is lined with plastic bags and the outer layer is packed with plastic composite film woven bags. The net weight of each bag is kilograms or kilograms.
The proportioning concentration of polyacrylamide for fragrance making is as follows
Weigh it with a balance and set it aside
Put a certain amount of water into the beaker, and place the beaker on the electromagnetic stirrer
Start the mixer , add the batches into the beaker one by one and stir for about minutes, carefully observe the state of the solution, and complete the preparation of the solution when the granular and thick lumps completely disappear.
Features of polyacrylamide specially used for perfume making
It has good water solubility and can be completely dissolved in cold water.
Add a small amount of this series of products to achieve a great flocculation effect. Generally just adding / will give full effect.
Using this series of products at the same time with inorganic flocculants polymerized iron, polyaluminum chloride, iron salts, etc. can show greater effects.
WhatsApp
