Year1
- 规格：
- 25千克/桶
The paint is a single component made from grinding chlorinated rubber resin, mineral resin, mineral oil, plasticizer and high-efficiency drier, and diluting with butanol.
2. Characteristics
The paint has high gloss, quick drying, good adhesion and good weather resistance. In particular, its water resistance, alkali resistance and chemical resistance are better than other products.
3. Use
This paint is suitable for decoration and protection of various equipment in construction engineering, chemical industry, metal equipment, under water ponds, above ground pipelines and hot and humid areas.
4. Construction Reference
Lift the paint to the site, shake the bucket lid downward for a few minutes, use a special tool to open the bucket lid, and use a clean wooden stick or iron rod to fully stir the paint up and down evenly. According to the requirements of spraying construction, use special diluent to adjust the viscosity of the paint, then filter it with mesh cloth and wait for spraying.
Gently smooth away the mechanical impurities or large and small particles on the surface anti-rust paint or mid-coat paint of the equipment being coated with water sandpaper. Clean the floating dust from the equipment with a vacuum cleaner or manually.
Before taking up the job, operators must wear labor protection equipment, turn on the on-site exhaust of the workshop, keep the workshop in a ventilated state, and clean the environmental sanitation of the spray workshop in time before construction can begin.
Before spraying, first turn on the air pump for 10 minutes, flush out the moisture in the air pump and the accumulated water in the storage purification tank. The pressure on the pressure gauge when the air pump is working is kilograms. When spraying with two guns, the spray gun The distance from the equipment to be coated is centimeters.
WhatsApp
