Detailed information of 500 degree silicone high temperature resistant paint

The first component is a two-component heat-resistant anti-corrosion coating prepared by advanced technology using epoxy-modified silicone resin as the film-forming base material, adding heat-resistant pigments and fillers, special additives, and a primer, middle coat, and top coat.
Two performance characteristics

The heat resistance can reach ℃, and the coating has excellent heat resistance and anti-corrosion properties.

Good anti-corrosion performance, good adhesion and physical and mechanical flexibility of the coating, excellent water resistance, good resistance to natural and industrial atmosphere corrosion and temperature resistance Moisture resistance, electrical insulation, toughness, and solvent resistance are all good.

Good weather resistance. The color of the coating is bright and full, and its gloss retention and weather resistance far exceed that of epoxy-type heavy-duty anti-corrosion coatings and asphalt-type heavy-duty anti-corrosion coatings.

Easy to use, cured at room temperature, not limited by site environment, use time is not limited, the coating can be cured at room temperature, can also be dried (℃, if the coating If it is too thick, it can be diluted with special diluent.

Three scopes of application are suitable for anti-corrosion coating of metallurgical machinery and steel structures in the heating industry with heat resistance up to ℃

Can be used with When used in conjunction with the inorganic zinc-rich primer, it can also be used for anti-corrosion of steel structures, structures, pipes, boilers, machinery

instruments, furniture, light industrial products, etc.

Construction methods

High-pressure airless spray, air spray, manual brushing

Coating performance

Adhesion (cross-hatch)


Resistance Impact resistance


Flexibility


Salt water resistance, hours

No blistering and no rust

br/>

Heat resistance ℃

℃


Five construction methods

The preparation method will Stir the paint thoroughly until there is no sediment at the bottom of the barrel. According to the example of paint solid (weight ratio), add the curing agent in the stirring state and mix evenly.

Surface treatment requirements, use mechanical removal Rust can be removed by manual rust removal or chemical treatment. It is required to be dry and clean without oil stains, rust, and foreign matter.

Coating thickness High-pressure airless spraying Air spraying The dry film thickness of each coat should be about , the thickness of each pass of manual brushing is.

Theoretical consumption if the actual coating environment during construction, coating method, coating technology, surface condition, structural shape, surface area, etc. are not considered, the general The amount of paint consumed is.

The coating interval is hours when the ambient temperature is at ℃, and it is hours when the ambient temperature is above ℃.

Tools are specially designed for high temperatures. Thinner cleaning.

Coating maintenance After the last topcoat is applied, it must be cured naturally for days when the ambient temperature is above ℃, and appropriately extended when the ambient temperature is below ℃.
The validity period is months, exceeding Validity period, it can still be used after passing the re-inspection
Manufacturer Jining Yizhan Technology Development Co., Ltd. Contact person Li Zhiran
Contact number