We supply FPC antenna glue, which does not turn white, has good adhesion and is easy to apply!

Adhesive additives are specially developed based on the fact that the adhesive-backed film antennas in the mobile phone industry are prone to lifting from the plastic casing.
The bonding is suitable for surfaces
glass
,,/
and other most plastic materials. It has the advantages of strong adhesion, no whitening, easy operation, and good environmental resistance.

, Bonding surface preparation
Use a fiber-free cloth dipped in
and alcohol to clean the bonding surface.
br/>, Operation
Use a cotton swab or brush or nozzle to apply
+
evenly on the bonding surface.
Sometimes it is necessary to apply twice
+
, usually after
minutes, after the first application is completely dry, apply the second time
br/> Drying time
Drying time generally depends on temperature, humidity, and coating thickness. High temperature, low humidity, and low coating thickness are beneficial to the drying of the treatment agent.
Normal drying time
minutes, during which care must be taken that the coating surface is not contaminated.
br/> ,
Bonding
,
+
After it is completely dry, stick the glued
film antenna to the dried coating. layer surface and apply a certain amount of pressure.
If it can be hot pressed, the temperature
temperature and time
seconds will result in better initial viscosity!
br/> , excess
+
can be cleaned with alcohol.
Consultation phone number
br/> br/>