Sikadur-42HE early strength epoxy grouting

Early strength epoxy grouting
Application of epoxy resin grouting material
Self-leveling epoxy mortar can be used in concrete, stone, mortar, steel, aluminum, asbestos cement, wood, polyester and epoxy.
, Structural bonding starting rods, anchors, supports, pillars and fixed rods
, Grouting anti-collision guardrails, support plates, machine bases, mechanical bridges, bridge supports
, Track grouting cranes Rails, tunnels, bridges

Advantages of epoxy resin grouting materials
No solvent
, excellent fluidity, even if the grout layer is extremely thin
, no Shrinkage
, can be constructed on wet base surfaces
, rapid hardening
, high mechanical strength
Technical parameters of epoxy resin grouting material

Color
/> Mixed gray
Component yellow
Component brown
Component gray
Density

Component~
Component~
Components~
Mixing ratio
Weight ratio
Volume ratio
Add components according to climatic conditions and required construction performance
Elastic modulus (static)
~ /
Thermal expansion coefficient

Packaging
Set (++Industrial packaging needs to be customized.
Component (quartz sand) bagged
Shelf life
Can be stored for months in original packaging

On-site activity






< br/>

~minutes

~minutes



~minutes

~ minutes



~minutes

~minutes



~minutes

~minutes


Compressive Strength/



Days

Days< br/>
day

day







< br/>













Flexural tensile strength/



day

day

day< br/>
days





















Bonded tensile strength Strength, after days, according to
On concrete ~ / Concrete damage)
On steel/

Construction requirements
Minimum construction and base surface temperature
+
Maximum
+
Single construction layer thickness
Minimum
Maximum
When the temperature of the construction base surface is lower than
,
Liquidity will be reduced. Before use, place the material at room temperature for at least
+ ~ +
hours.
Surface treatment
All base surfaces must be clean and free of clear water and other loose materials. Cement residue must be removed. Recommended treatment methods Concrete, mortar, stone sandblasting or high-pressure water gun flushing Steel, iron, sandblasting, sanding, epoxy, polyester, sanding with coarse sandpaper.
Instructions for use
Pour all the
ingredients into the
component container, and use a basket-shaped stirring blade to connect the low-speed electric mixer (
) until the liquid becomes turbid at first. Become completely clear. Avoid introducing air. Pour the mixture into a suitable container and add the ingredients. Stir with a hand-held electric mixer for
minutes until the mortar has a uniform viscosity.
Before construction, set aside the mixture for a short time to allow gases to escape.
Pour the mortar into the prepared funnel and maintain sufficient static pressure. Ensure that introduced gases can escape freely.
Large volumes must be poured in layers. Pour the next layer as soon as the previous layer hardens and begins to cool.
Industrial Equipment
In a suitable container, mix the components prepared in the correct proportions as stated above.
Opened containers (
+
components) must be closed immediately after use.
Cleaning
Clean tools and equipment with
cleaning agent immediately after use. Hardened material can only be removed mechanically.
Ecology

Components will pollute water bodies, please do not pour them into sewage systems, water bodies or soil. Any residual material must be properly disposed of in accordance with local regulations.
Toxicity

Components according to relevant

Components
Non-toxic
Transportation

Components< br/>/ )
Ingredients
/ )
Ingredients not hazardous
Safety measures
Product may cause skin irritation. Wear protective gloves and goggles. Apply barrier cream to protect your skin before starting work. In case of accidental contact with eyes or secretory tissue, wash thoroughly with warm water and seek medical attention immediately.