Sikafloor-264 two-component colored epoxy material

Two-component epoxy thin coating, self-leveling coating/texture coating and sealing layer

It is a two-component colored epoxy material. Because of its low viscosity, it can be applied as self-leveling coatings, textured coatings, sealants and broadcast coatings.
Product Usage

△ Roll-on texture coating, this self-leveling mortar floor is suitable for concrete and cement leveling, and is suitable for moderate traffic areas, such as warehouses, assembly workshops, production plants, Garages and loading ramps, etc.
△ Sealing layer of spreading systems, such as multi-purpose storage and underground parking lots, aircraft maintenance hangars and wet processing areas, such as beverage industry, food industry.



Product advantages
◇ Compliant with standards/
◇ Excellent chemical resistance and mechanical damage resistance
◇ Easy to construct
◇ Economic
◇ Moisture-proof
◇ Solvent-free
◇ Dense semi-glossy floor
◇ Anti-slip

Product Data
Appearance /Color
The resin component is colored, the liquid curing agent component is transparent, the liquid
standard color, and other colors on request.
Packaging
Components kg/barrel Components kg/barrel
Storage conditions/warranty
Under + to + dry conditions, the packaging must be sealed and not opened, etc. for good storage Under the conditions, the product quality guarantee period is two years after the production period.

Technical indicators
Chemical composition
Epoxy resin
Density
Components~kg/L
Components~kg/L
/> After mixing ~ kg/L
All the above density indicators are tested in + environment
Solid content
~ (volume) / ~ (weight)
Compressive strength< br/> Resin ~ (days/ +) /
Flexural strength
Resin ~ (days/ +) /
Bonding strength
(Concrete failure)
Xiao Hardness
( days/ +)
Wear resistance
( ) days/+) ( ( )
Chemical resistance
Resistance to various chemical solutions, specific indicators Please refer to the chemical corrosion resistance table.

Substrate conditions
The base concrete needs to be of sufficient strength (compressive strength at least and tensile strength at least /).
The surface must be smooth and clean, Dense, dry, and without loose particles. The surface is clean, without dirt, grease, etc.
If you are not sure about the surface base, please do the necessary sample test first.
Base treatment
Mechanical treatment is required Methods such as sandblasting or grinding (etc.) can completely remove cement laitance and oil stains that are not strong enough. Until a base layer with good surface strength and roughness is obtained (a longitudinally open textured surface). The soft concrete must be removed and the concrete surface must be loose. The voids and pores must be completely exposed. The appropriate Sika special system should be used to repair and fill the voids/pores on the concrete surface. The treatment and leveling of the concrete base are to obtain a smooth and beautiful surface. Suggestions for difficult-to-treat bumps Dust and loose laitance produced by sanding must be completely removed before construction, using steel brushes and vacuuming.