3G/H ozone generator accessories DC ozone machine accessories DC12V

Ozone generator accessories/ozone high voltage module power supply + ozone tube are a set.
The power supply has a working indicator light
Technical parameters
Gas source requirements
, Oxygen (flow)
, Air (flow)
Maximum ozone concentration/( Oxygen flow at/hour)
Ozone production, (oxygen source/)
, (air source/)
Working environment requirements
Ambient humidity is less than, the ambient temperature is less than degrees Celsius, dry and clean Well ventilated environment.
Working voltage
Power consumption
Output high voltage
High voltage frequency
Cooling method air cooling
Overall dimensions Ozone tube** Power supply size**
Net weight
Power supply features
Adopt modular potting design, moisture-proof and waterproof.
, undervoltage and overvoltage protection.
, power converter overheating protection, high voltage open circuit protection, short circuit protection.
Characteristics of ozone tube
Durable (stainless steel internal electrode, stainless steel ozone channel interface, stainless steel water-cooling interface, PTFE fasteners, fluorine rubber sealing components).
, good heat dissipation (first-grade aluminum alloy enlarged size heat sink, sunflower heat sink patented technology, internal water cooling + external air cooling).
, high ozone concentration (using hydroxyl quartz tube, eight-hole positioning control of discharge gap, extremely high precision).
, Internationally leading technology (the first in China in terms of materials, appearance, precision, and stable performance)
About installation
The ozone tube and module power supply are installed on the insulating board, with a distance of more than 100 meters, and the high-voltage line has no spring One is connected to the terminal on the heat sink, and the other with a spring is connected to the middle part of the electrode in the ozone tube. Refer to the picture for details. Do not merge the two high-voltage wires together and keep the distance above each other. The insulation board is fixed inside the chassis. Other non-high-voltage wires cannot be close to places with high voltage. Other working instruments (ammeters, voltmeters, digital control terminals) cannot be close to places with high voltage. High voltage will interfere with the normal values of the instrument. more than the. The chassis needs to have two vents, one of which is equipped with a fan. The wind blown into the chassis by the fan must be able to blow to the heat sink of the ozone tube. The other vent is used to exhaust air.
Physical illustration of the connection method of high-voltage wires with springs
The wiring method of high-voltage wires and power supplies is as follows
_!! _!!
The first step is to weld the high-voltage wires without springs to on the heat sink.
The second step is that if there is a spring on the high-voltage line, flatten the spring and insert it into the middle of the pipe.
The third step is to use a small screwdriver to insert the spring into the middle part of the ozone tube.
The two gas nozzles on the ozone tube, regardless of air inlet or air outlet, can use oxygen as the gas source or air as the gas source. If oxygen is used, the flow rate is / is enough, and the maximum output can be Up to / around /, the highest concentration can reach /. If air is used, the flow rate should be between / Increase ozone concentration. If you need to purchase a drying filter, we supply it
The air drying filter uses the adsorption principle of activated carbon/silica gel particles to filter out moisture and dust in the air to obtain drier and cleaner air. Thereby obtaining a higher ozone concentration and improving the service life of the discharge tube.
After using the protective air drying filter for a period of time, due to the different humidity and cleanliness of the use environment, the use time is also different. You can compare the filters by observing Internal color changes or changes in ozone concentration are detected to determine whether maintenance is required. Maintenance method: Pour out the particles inside the filter and dry them (you can expose them to the sun, use a hair dryer to dry at high temperatures, or use other drying equipment to dry them and then put them back. If you have activated carbon particles, you can replace them directly.
Recommendations
If the buyer has no previous experience in installing machines or the experience is not sufficient, after installing the accessories, take a photo to the shop owner to confirm whether it is installed correctly to avoid product damage due to installation errors. It will bring losses to you.
Finally, buyers are reminded that the generator needs to dissipate heat. A fan must be used to dissipate heat when working. There is high voltage when the generator is working. Do not touch it. It should be installed inside the chassis to prevent high voltage. Electric shock.
Taisheng Technology specializes in R&D and production of various ozone generators and ozone peripheral products, control circuits, high-voltage frequency conversion circuits, etc.
Technical consultation Deng Zhiren