Ozone generator 30G/H quartz tube ozone accessories ozone machine equipment accessories

Quartz tube ozone generator accessories include an adjustable high-voltage power supply and an ozone tube as a set
. Used in high-end ozone equipment, it has high precision, good stability, and strong controllability. The whole set is purchased with a free one-year warranty.
When leaving the factory
One adjustable ozone power supply, one ozone tube, two copper water-cooling connectors, one positioner, and one pair of power plug terminals. Please check the accessories after receiving the goods.
Technical Parameters
Product Model_!!
Use gas source
Oxygen, or air/.
Maximum ozone concentration
/(oxygen/hour)
Maximum ozone production
/(oxygen flow rate/hour)
Working environment requirements
Ambient humidity is less than The ambient temperature is less than degrees Celsius, and it is a dry, clean and well-ventilated environment.
Generating tube size**
Cooling method: internal water cooling + external air cooling
Dielectric material silica pure quartz tube
Power supply size**
Working power supply/（ Please communicate with the owner for other voltages).
Output power ~ (can be continuously adjusted)
Output voltage (effective value)
Working frequency ~ ( (can be continuously adjusted)
(If needed ~ voltage change control to adjust ozone production output , please communicate with the manufacturer
)
Power supply characteristics
, push, bandwidth automatic/manual,
, power-on slow start, (limit inrush current)
, power supply Overvoltage protection
, power converter overheating protection, output short circuit, open circuit protection.
, circuit anti-interference, moisture-proof, anti-corrosion design.
Ozone tube features
, durable (stainless steel Internal electrode, stainless steel ozone channel interface, stainless steel water-cooling interface, polytetrafluoroethylene fasteners, fluorine rubber sealing original parts).
Good heat dissipation (first-grade aluminum alloy enlarged size heat sink, Sunflower heat sink patented technology, Internal water cooling + external air cooling).
, High ozone concentration (using hydroxyl quartz tube, eight-hole positioning control of discharge gap, extremely high precision).
, International leading technology (material, appearance, accuracy, stability The first one in China with the best performance)
About installation
The quartz ozone tube and high-voltage power supply are installed on the insulating board, with a distance above the two. The positive electrode (white wire) of the high-voltage wire is connected to the terminal on the heat sink, and the other The high-voltage ground wire (yellow-green) is connected to the terminal on the water-cooled end of the ozone tube. Do not merge the two high-voltage wires together and keep them at a distance. The insulation board is fixed inside the chassis. Other non-high-voltage wires cannot be close to places with high voltage. Above the distance, other working instruments (ammeters, voltmeters, digital control terminals) cannot be close to high-voltage places. High voltage will interfere with the normal values of the instruments. The distance is greater than. The chassis needs to have two vents, one of which is equipped with a fan, and the fan blows in The wind from the chassis should be able to blow to the heat sink of the ceramic tube, and the other vent is used to exhaust air.
The two air nozzles on the ozone tube, regardless of the air inlet or outlet, can use oxygen as the air source, or Air can be used as the gas source. If oxygen is used, the flow rate is / is enough. The output can reach up to / or so, and the concentration can reach /. If air is used, the flow rate should be between /. The two water nozzles at the water cooling end should not It can be divided into water inlet or outlet. It can be in or out from either side. It is recommended to install the ozone tube vertically.
Delivery instructions
We will confirm it through multiple tests after the buyer takes the photo. Only when everything is correct will it be packaged and shipped. When leaving the factory, the internal adjustment of the power supply has been fully debugged and all parameters have reached the best performance value. Buyers should not adjust the internal adjustability easily.
After the external potentiometer is installed After the equipment is installed, you can adjust it arbitrarily, and adjust it clockwise until the maximum ozone output is the maximum value, and vice versa.
Precautions
When the ozone generator (ozone tube) works continuously for a long time (a single use exceeds minutes) requires internal water cooling and external air cooling. As long as the accessories are installed correctly, the water cooling and air cooling are appropriate, and the air source is stable, the product can work continuously for hours and days. The lifespan can be up to several years. Do not use in flammable and explosive environments.
Welcome to consult Deng Zhiren