MAX200 impregnated resin glue Lantian

★
Product Features
,
Impermeable
,
Anti-freeze
,
Salt-resistant
,
Alkali resistance
,
resistance to weak acid corrosion
,
and strong adhesion to a variety of materials.
,
The thermal expansion coefficient is close to that of concrete
,
so it is not easy to detach from these bonded base materials
,
and has good durability.
,
Can be applied on wet substrate surfaces
,
No drying required
,
Can be hardened in a humid environment or under water.
,
Easy to operate and construct
,
Similar to ordinary cement mortar construction
,
Easy to clean
,
Just use water Clean.
★
Scope of application
,
Suitable for the treatment of defects such as honeycomb
,
loopholes and exposed bars on the surface of concrete structures.
,
Concrete structures
,
Repair damage to stair treads and other damage.
,
The bottom layer should be leveled when bonding steel reinforcement and bonding carbon fiber reinforcement.
,
Can be used as corrosion-resistant materials in seawater
,
saline-alkali areas and chemical plants and other corrosive environments.
,
Used for pasting acid-resistant bricks.
★
Technical parameters
Test items

Performance indicators

Test results

Flexural strength
/>




Compressive strength





< br/>






Neutralization resistance

＜
< br/>

Bonding strength

Normal temperature





Hot and cold Repeat





Water permeability

＜




Water absorption (/
)

<



Water absorption coefficient (/
?< br/>）

＜



Note the recommended reference dosage
/
tons
★
How to use
,
Check that the packaging of this product is intact
,
The label is correct.
,
Open the lid of the bucket
,
and take out the pre-ingredients marked
,,
in the bag
of the bucket.
,
Shake the
materials
,
evenly and pour
,
into the buckets
,
After stirring thoroughly
,
then slowly pour the powder marked
into the bucket while stirring
,
stir into a uniform mortar Just like that. If the mixture becomes viscous or difficult to stir evenly
,
this package can be stirred with
clean water
, which will not affect the final performance of this product.
★
Notes
,
This product is a cement-based material
,
It takes
days to fully harden.
,
You can proceed to the next process within hours of using this product.
,
The mixed epoxy mortar should be used up within
hours
,
If it becomes dry and thickened within this time, you can add appropriate Stir the water evenly before use.
★
Packaging and Storage
,
The packaging specifications of this product are
/
barrels.
,
The unopened shelf life is
months
,
Exceeding the shelf life must be inspected and passed before continued use.
, This product is non-toxic, odorless, non-flammable, non-explosive, meets green environmental protection requirements, and can be stored and transported as general cargo.