Supply conveyor screw conveyor conveyor feeding auger

The screw conveyor is designed and manufactured in accordance with the "Screw Conveyor" standard. It is a replacement product of the screw conveyor. The head and tail bearings are moved outside the shell. The hanging bearings use sliding bearings and are equipped with dust-proof sealing devices. The bearing bushes are generally made of powdered metallurgy. Felt bearing bushes are used to transport cement. The hanging shaft and the spiral shaft are connected by sliders. When disassembling the spiral, There is no need to move the driving device, no need to move the screw when disassembling the suspension bearing, and the suspension bearing can be lubricated without disassembling the cover. The whole machine has high reliability, long life, strong adaptability, and easy installation and maintenance.
[Structural Composition]
The rotary conveyor is a whole composed of a driving device, a shell tube (closed tank), a spiral body, etc.
The shell of the rotary conveyor is made of steel pipes connecting each section into a whole through flanges, so the overall rigidity is good, so the working position can be selected at will and can be disassembled and moved at will.
The discharge port of the rotary conveyor can be made at the required inclination angle according to the conditions of the work site, and can be connected and fixed with its supporting equipment.
The blades of the screw conveyor are made of integral continuous blades rolled from disc-shaped steel strips or assembled and welded in a single piece. The screw surface has high precision, the inner hole, outer diameter and pitch are accurate, and the conveying conditions are optimal.
[Working Features]
The conveyor can be continuously conveyed whether it is horizontal, inclined or vertical. Especially when conveying at an angle or vertically, it can be directly connected and fixed with its supporting equipment, without the need for a dedicated foundation. Make the most of your space.
It has good sealing performance and no dust leakage. It does not waste materials and creates a good working environment.
The rotary body has small diameter, high rotation speed and large conveying capacity. It is especially suitable for inclined and vertical conveying.
It has a simple structure, reliable operation, low manufacturing cost, and is convenient for intermediate loading and unloading. The conveying direction can be reversed, or it can be conveyed in two opposite directions at the same time.
During the delivery process, the materials can be stirred, mixed, heated and cooled, and the material flow can be adjusted through the loading and unloading gate.
During use, the sealing of the trough should be maintained and there should be an appropriate gap between the spiral and the trough to prevent the spiral and trough from being easily worn.
[Technical parameters]
When selecting a screw conveyor, first of all, on the premise that the material is suitable for screw conveying, the user can determine the model and type of the screw conveyor based on the parameters and on-site process layout provided below. Specifications, position status and length. The screw conveyor used in the concrete mixing station transports materials with a relatively large proportion, and the inclination angle of the conveyor should not be greater than 10 degrees. Otherwise, the efficiency of the conveyor will be greatly reduced.