Year1
- 产品型号：
- 齐全
- 产品规格：
- 标准
- 包装：
- 简装
Bucket rake machine product introduction
Bucket rake machine is suitable for tunnels with a net height of more than 1 meter and a net cross-section of more than square meters.
The rake bucket machine has a simple structure, high rock loading efficiency, good reliability and wide application. Not only can it be used in level tunnels, it can also be widely used in tunnel excavation with mine carts or skips for loading operations. , and is suitable for loading rocks in horizontal tunnels and inclined shafts with an inclination angle less than 10 degrees uphill and in corner tunnels. The rake bucket machine can be used with mine cars or skip buckets.
Rake bucket machine, overview and functions of each main component
The fixed wedge is fixed on the head and used to hang the tail wheel. It consists of a wedge body, a wire rope with a drogue sleeve, and a collar.
Tail The wheel is suspended on the fixed wedge collar to guide the return of the rake bucket. It is mainly composed of the side plate wear-resistant sheave hook core shaft and bearings. The rake bucket makes reciprocating motion under the traction of the main rope and the tail rope, and scrapes rocks. The rake angle is 1, and it is universal for flat and inclined tunnels. It is the main tool for rock rake machines to scrape rocks. The rake teeth are made of wear-resistant high manganese steel and will not wear out. In serious cases, the rake teeth can be replaced. The control mechanism on the trolley includes the winch guide wheel and the middle slot of the feed trough and the unloading trough. There is a lifting device in the middle of the feed trough, and the screw can be rotated to adjust the height of the dustpan mouth. In order to guide the rake in and out and prevent the gangue from scattering, there are also left and right guide baffles at the hinged part, the front and rear bends of the middle groove, each with The back of the unloading groove of the wear-resistant curved plate unloading chute is equipped with spring bumpers and supporting feet with buffering effect
Electrical part This rock rake comes with a motor, which can be provided separately according to the user's needs (can be converted to kilowatt) ) One set each of explosion-proof and safe spark-type control box (referred to as starter)-type explosion-proof push button switch and mercury volt lamp for lighting (the power supply is set in the starter), but it must be specified when ordering. The above main The electrical voltage is /V
Contact person
Manager Zhang
Mobile phone
Mobile phone
Telephone
Tel
Address Jining, Shandong, China
WhatsApp
