Henan DYTZ electro-hydraulic putter, the best electro-hydraulic putter

Electro-hydraulic push rod, that is, electro-hydraulic push rod, is suitable for reciprocating push-pull linear (or reciprocating rotation at a certain angle) motion. It can be used in places where work objects are raised or lowered or clamped. It can also be used in long-distance and high-altitude dangerous areas, and can be used with Computer networking for centralized (program) control. Now it is widely used in metallurgy, mining, coal, electric power machinery, food, cement, chemical industry, water conservancy and transportation and other departments. It is an indispensable universal power source. Working Principle: The electro-hydraulic push rod uses an electric motor as the power source. Through the forward (reverse) rotation of the electric motor, the hydraulic oil outputs pressure oil through the two-way gear pump, and is sent to the working cylinder through the oil circuit manifold to realize the reciprocating movement of the piston rod. Advantages
It has automatic overload protection function. When the electro-hydraulic push rod is working, if the external force on the piston rod exceeds the rated output force or the piston has reached the end point, the motor is still rotating. At this time, the oil pressure in the oil circuit increases to the set value. pressure, the relief valve overflows quickly and accurately to achieve automatic overload protection. Although the motor is rotating, it will never burn out. The oil circuit integrated block of the locking function electro-hydraulic push rod is designed with a pressure self-locking mechanism. When the motor stops rotating, the piston rod immediately stays in a certain position, and the pressure oil is in a pressure-maintaining state. Step adjustment can be carried out steplessly within the rated speed output force and stroke range according to user requirements.
Description of shape The electro-hydraulic push rod is mainly composed of six basic elements including the type of push rod, motor protection level, rated output force, stroke, rated speed and angle of use. It can also be equipped with three adjustment functions according to the special requirements of the customer. That is, speed adjustment, push-pull force adjustment, and stroke adjustment (positioning of the stroke switch). Except for the above three adjustment functions, which must be clearly stated when ordering, please refer to the model preparation method and fill in the six major elements carefully. Type integral straight electro-hydraulic push rod technical parameters (selection table)
Model rated output force rated speed motor model stroke manufacturing range stroke manufacturing range
thrust pulling force pushing speed pulling speed
Note The voltage level of the motors listed in the list is , the protection level is , and the insulation level is level . If it exceeds the stroke manufacturing range or speed manufacturing range listed in the table, please indicate it separately. Otherwise, it will be manufactured according to the technical parameters in the table. The speed range in the table is for horizontal use. The speed for upward or downward use is half of that for horizontal use. The typical numbers and powers listed in the table indicate the power of this type of push rod when the rated output force and rated speed are at the maximum value. Motor power is directly proportional to the push rod thrust speed.