Wholesale price of anti-splitting clamp for concrete anti-bending device

Wholesale price of concrete anti-bending device and anti-splitting fixture
Concrete anti-bending device or anti-bending fixture is a new generation of testing instrument independently developed by our company. It is an indispensable part in concrete testing in conjunction with a universal machine. kind of testing equipment.
Main technical parameters: Maximum flexural load. Maximum splitting tensile load. Anti-bending standard clamp roller diameter. Net distance between upper and lower nip rollers
1. Structure: This clamp is mainly composed of the lower clamp base (), the upper clamp base (), the standard clamp roller () (), the upper and lower clamps of the anti-splitting clamp (), etc. The lower clamp base is fixed on the press piston through positioning pins () and washers (), and the upper clamp base is fixed on the press beam through upper supports (), diamond pins (), positioning pins on the press and two hexagon socket screws. .
2. Use and maintenance
When doing the bending test, follow the following steps for installation:
. Loosen the two hexagon socket screws on the cross beam of the press, remove the upper pressure plate, leave the positioning pin on the cross beam, and install it. The diamond pin () and the upper support () are fixed tightly with two hexagon socket screws.
. Remove the upper and lower pressure plates, concave ball seats, and dust covers of the press, and replace them with the lower clamp of this set. Put the gasket () on the piston, pin the positioning pin (), and install the upper and lower clamp seats and dust cover. Use the hoop on the original machine to fix it on the outside of the cylinder. Adjust the distance between the two guide posts () and tighten them with nuts.