Wholesale price of DB5-10-II electric steel bar gauge distance gauge steel bar dotting machine

Wholesale price of B-type electric steel bar gauge and steel bar dotting machine
1. Overview of electric steel bar printer
The electric steel bar printer is a marking instrument specially designed for testing the elongation of steel bars. Since the electric steel bar printer The printer's rotation speed is even and smooth, and it is more accurate than a manual rebar printer and is easy to operate.
2. Technical parameters of electric rebar printer
, Power input voltage: , Input current: , Printing gauge length:
, Dimensions: ** , Weight: about kilograms
3. How to operate the electric steel bar printer:
First, determine the straightness of the steel bar. The coaxial deviation of the steel bar should be no greater than 1.
Determine the printing gauge distance. The method to adjust the distance is to loosen the fixing screws on both sides of the printing assembly and move the taper rod sleeve to the left end, and move it to the right end to tighten the fixing screws.
, adjust the height handle, and put the steel bar into the groove (the straight side of the rebar is upward) to make it strong.
Adjust the height handle so that the tip of the cone is about the distance from the steel bar.
. Connect the power supply and turn on the power switch. The power indicator light will be on. If the printing assembly is in the middle position, the working indicator light will also be on. At the same time, the printing assembly will automatically stop when it reaches the leftmost end and the working indicator light will be off. , turn the direction switch to the right position, the motor runs normally, the printing assembly moves to the right end and stops automatically.
Lift the cone rod, loosen the fastening screw, take out the steel bar, and the printing is completed.
, and then move the direction switch to the left row position. After the motor runs, the printing assembly row will automatically stop when it reaches the leftmost end to maintain the readiness for the next job.
4. Precautions for electric rebar printer:
. Ground it reliably before use.
. Keep this instrument clean at all times and store it in a dry place.
Frequently add lubricating oil to the sliding parts.