QZ-20 wall brick special mixer wall brick slurry material mixer wholesale price

Special mixer for wall bricks, wall brick mixer, wall brick slurry material mixer, wholesale price
1. Introduction of special mixer for wall bricks:
Special mixer for wall bricks follows B The latest special mixer for wall bricks is designed and produced according to the technical regulations of "General Requirements for Brick Compressive Strength Sample Preparation Equipment". It is a special equipment for mixing pure slurry. The control system adopts program-controlled frequency conversion technology and has the advantages of simple installation, digital display, beautiful appearance, and easy operation.
Working principle of the special mixer for wall bricks:
The special mixer for wall bricks uses the relative movement between the stirring arm and the mixing pot. The stirring arm is the driving shaft and the mixing bucket is rotating, so that the mixing arm and the mixing pot are rotating. There is a stirring effect between the barrels.
Comparison of the test results of the special mixer for wall bricks,
Compared with the special mixer for wall bricks on the market that only has a mixing shovel movement, the mixed slurry is more delicate and uniform. The mixing time is relatively short.
2. Main technical parameters of the special mixer for wall bricks:
Rated voltage:
Rated frequency:
Rated power:
Stirring speed: Rated capacity of the mixing tank:
Stirring capacity:
Rated capacity of the mixing tank for feeding and discharging
Depth of the mixing tank
Inner diameter of the mixing tank
3. Building walls Operation process of the special mixer for bricks:
Before use, place the special mixer for wall bricks on a horizontal workbench, connect the mixer to the power supply of the operation cabinet, then press the start switch and rotate slowly. If there is a problem with the mixing pot and The mixing shovel cannot move relative to each other. Exchange any two wires in the power cord.
4. Precautions for the special mixer for wall bricks:
Please read the instruction manual carefully before use and use it strictly in accordance with the operating procedures.
. The grounding wire device must be connected before starting the machine. It cannot be removed at will during work to avoid electric shock.
When the machine is working, hands are not allowed to reach into the mixing pot to avoid accidents.
If you find that the machine is faulty, you should stop it immediately and ask a professional to check it.
. It is strictly forbidden to bring in hard metal objects such as nails and iron wires when feeding.
After the mixing is completed, remove the barrel and mixing blades, clean them, and store them in a dry place.
When disassembling the mixing pot, be sure to handle it with care to avoid bumping, deformation and normal use.
. This machine must be grounded, and a professional electrician must be installed when installing the power supply.