Year1
- 结构：
- 摆动式
- 频率：
- 28KHZ
- 材质：
- 不锈钢304
Steel pipe ultrasonic cleaning equipment
Type of ultrasonic cleaning system
Applicable fields: stainless steel pipes, copper pipes, elbows, aluminum pipes, seamless pipes
Purpose: pipe wall and inner cavity cleaning
br/> Functions of ultrasonic, heating, liquid circulation, shaking, drainage
Packaging industry wrapping film
Ultrasonic cleaning machine
Ultrasonic rinsing machine
Ultrasonic generator table
Ultrasonic vibrating plate table
Total machine weight:
Input voltage:>
Ultrasonic cleaning tank parameters
Rinsing tank parameters
Appearance Dimensions: **Outer dimensions: **> Inner tank size: **Inner tank size: **> Ultrasonic power: Filter flow: > Ultrasonic vibration box wall thickness: Electric pump head: Speed r
Ultrasonic frequency :Number of nozzles: pc
Filter flow: Nozzle diameter:
Electric pump head: Speed r Speed regulating motor:
Speed regulating motor: Swing rate: ~r
Swing rate: ~Transfer heating power:
Heating power: Time control:~
Time control:~>
> 2. System composition
One combined electrical control cabinet
Ultrasonic generation Equipment table
Ultrasonic vibrating plate table
One ultrasonic cleaning tank
One ultrasonic rinsing tank
Two sets of filter circulation devices
Two sets of material frame swing devices
3. Equipment usage
Mainly used to clean the inner and outer walls of stainless steel pipes, steel pipe couples, copper pipes, aluminum pipes, and Bondi pipes to remove grease, processing chips, processing oil, emulsion, polishing wax, floating rust, etc. wait.
Power supply conditions
Power supply, voltage change range ~ +%, frequency change range %.
Water supply conditions
Number of drainage pipes: Pipe diameter:
IV. Operation guide
. Add water to the ultrasonic tank and rinsing tank to the specified level, and clean it with ultrasonic water in proportion. Add cleaning agent to the machine tank.
. Turn on the power, turn on the heating system of the ultrasonic tank and rinsing tank, preheat and heat, so that the water temperature rises to ~℃.
.Press the ultrasonic start button and lay the pipes on the material frame in the ultrasonic tank (it is recommended that each batch should be within a hundred pipes). The cleaning time is usually several minutes, depending on the workpiece. Depends on the degree of soiling and the quantity of cleaning in each batch.
. Turn on the circulation filter switch in the ultrasonic tank to filter impurities while cleaning, usually for small flow circulation.
. Turn on the switch of the swing device in the ultrasonic tank, so that the pipe fittings swing with the material frame at a constant speed. The swing trajectory is generally ~ rotation and can be adjusted freely.
. Lift out the pipe fitting, hold it slightly tilted above the ultrasonic tank, and pour out the remaining cleaning fluid in the pipe.
.Place the pipe fittings in the rinsing tank, turn on the swing device and circulation filtration device of the rinsing tank, and rinse away the cleaning liquid residue and residual fine particles on the pipe fittings. Large flow circulation filtration can be carried out because there is no ultrasonic setting in the tank. , it is necessary to consider the interference of water flow on the ultrasonic emission direction.
. Lift out the workpiece, pour out the liquid at an angle, and complete the entire cleaning process.
Before leaving get off work, turn off the power, release the liquid in the ultrasonic tank, and rinse the maintenance equipment with clean water.
Quality Inspection
All materials on the supplied equipment have been visually inspected. Important parts and welded structural parts should undergo ultrasonic testing, and the steel materials in important load-bearing parts should have factory quality inspection certificates. The cleaning tank was tested for leakage and a test report was provided.
Anti-corrosion and paint
The parts of NVC ultrasonic copper pipes, steel pipe cleaning machines and all ancillary equipment have been cleaned internally before assembly, such as fillers, metal cutting, etc., and the internal and external surfaces have been thoroughly cleaned All mill scale, rust scale, grease, etc. are removed. At the same time, necessary surface rust removal treatment is also carried out before leaving the factory, and primer and fluorocarbon paint are sprayed according to relevant national standards.
Label
All assembly parts of the ultrasonic cleaning machine are equipped with nameplates. The nameplates mark the main technical specifications of the assembly. The nameplates of the assembly parts of the supporting factories are kept intact for easy inspection. Instrument panels, nameplates, safety signs and instructions must be written in Chinese
WhatsApp
