Engine gasoline engine ultrasonic cleaning machine

结构：

一体式

频率：

25KHZ

1. Product Overview
Ultrasonic cleaning machine, this equipment consists of four parts: ultrasonic generator, ultrasonic cleaning tank, electric heating (temperature adjustable), filter circulation device (built-in filter element). The ultrasonic generator converts power frequency electrical energy into high-frequency electrical signals and transmits them to the ultrasonic transducer through high-frequency cables. After the transducer is applied with high-frequency voltage, it generates powerful ultrasonic vibrations that spread rapidly in the liquid. , acting on the liquid medium in the ultrasonic cleaning tank, generating thousands of vibrations per second, thereby shaking off the dirt attached to the inner and outer walls of the engine to achieve the purpose of cleaning.
2. Technical Parameters
Overall dimensions ()
Inner tank dimensions ()
Weight approx. (running time: approx.)
Necessary equipment power supply %
Water supply Normal pressure city water
Drainage
Operation display shows manual button type, rotary switch, digital display
Tank material stainless steel
Working frequency (bolt-fixed transducer)< br/> Ultrasonic power
Heating power
Circulation filter flow rate
Electric pump lift. Speed r
Time control~
3. Operating instructions
. Preparation before starting
. Check whether the machine is properly installed and adjust the machine to a horizontal position
. Turn all power switches and electrical switches to the off position, check whether the power supply meets the requirements and whether the chassis is grounded Reliable
. Check whether the water supply and drainage pipelines are connected correctly, and close all drain ball valves
. Connect the filter correctly, and the ball valves can be opened at this time.
.Inject city water + cleaning fluid into the tank according to the cleaning process requirements (make sure the water level exceeds the water level line after adding the engine to be cleaned).
.Start-up operating instructions (complete machine):
.Close the main power switch and each function switch of the control chassis, and start the operating power supply on the electrical box panel
.Adjust the settings of the thermostat Set the temperature, usually ℃, and adjust it once.
Set the cleaning time on the ultrasonic generator panel, which can be set according to requirements.
.Put the engine into the cleaning basket, lift it into the ultrasonic cleaning tank, pay attention to the liquid level, and close the cover. Only then can the ultrasonic button be activated.
. After cleaning, open the lid, take out the cleaning basket and prepare for the second batch of cleaning
. When you find that the cleaning liquid is turbid, press the ultrasonic cleaning tank cycle filter switch, and the cycle starts.
. After all cleaning is completed, open the bottom drain valve, drain the cleaning tank liquid, and clean the inner tank.
After the circulation system has been working for a certain period of time, the liquid needs to be drained and the filter element needs to be replaced.