DYTN800-S electro-hydraulic plow unloader, variable groove plow unloader

Plow type unloader, electro-hydraulic plow type unloader, double-sided plow type unloader, single-sided plow type unloader, coal plow,,,,, Manager Li: Plow type unloader is widely used in Power plants, mines, metallurgy, coal transportation stations, etc. handle segmented unloading of materials for delivery. The electro-hydraulic plow unloader is a mechanical product installed on the middle frame of the belt conveyor to perform unloading and control the flow and direction of material transportation. It can discharge the materials conveyed by the belt evenly and continuously into the hopper or the required place.
The working principle of the plow unloader: This unloader adds a variable groove angle and an auxiliary plow. It uses an electro-hydraulic push rod as the power source. The push rod drives the rod to extend to drive the plowshare down, and then passes through The connecting rod mechanism lifts the lifting and supporting roller group at the same time, and the lower edge of the plowshare is in close contact with the tape surface, so that the materials on the tape are discharged into the bucket and sent to the required place. After the unloading is completed, the driving rod retracts to raise the plow head, while the lifting roller group descends through the link mechanism to allow the material to pass smoothly. The improved plow unloader overcomes the shortcomings of the old unloader such as insufficient plowing, scraping of tape, poor overload capacity, and easy mechanical damage.
Most of the structures of the plow unloader adopt mechanical connection, especially the linkage mechanism, which relatively reduces friction and extends the service life. Using the electro-hydraulic push rod as the power source overcomes the shortcomings of the electric push rod's poor overload capacity, easy motor burning, and easy top bending of the screw. The moldboard of the main plowshare and the flap of the air-locking funnel are made of wear-resistant materials. The small plowshares are made of wear-resistant rubber plates, which greatly reduces the maintenance workload and saves costs.
Contact: Li Li
Telephone: Fax:
Mobile:
Ali Wangwang:
:
Email: @